Hello

[Benny65]

Just like to say hello Just started with this group/forum. Am finally back on a GSX1400, should never have sold my previous one but there we have it. Been reading through the post on brakes and pads, was interesting as my bikes brakes are pants.  I have changed out the existing hoses for stainless braided and new fluid. Better but still somewhat lacking so am going to change out the pads for EBC Sintered HH on the front and EBC FA on organic the back.
Will see where that gets me, after that I am probably a bit stuck on what's next lol.

[Notty]

Welcome - Croeso 

[gsxbarmy]

Just like to say hello Just started with this group/forum. Am finally back on a GSX1400, should never have sold my previous one but there we have it. Been reading through the post on brakes and pads, was interesting as my bikes brakes are pants.  I have changed out the existing hoses for stainless braided and new fluid. Better but still somewhat lacking so am going to change out the pads for EBC Sintered HH on the front and EBC FA on organic the back.
Will see where that gets me, after that I am probably a bit stuck on what's next lol.

Welcome @Benny65
Regards your brakes, it may well be that some of the pistons are sticking on your calipers, and/or the calipers need a good clean to get the brake dust off.
This thread tells you how you can clean your calipers https://gsx1400owners.org/forum/index.php?topic=237.0 so may well be worthwhile doing.

[grog]

Welcome Mate

[Mick_J]

Welcome to the forum Benny65.  I'm in North Somerset, where are you?

[KiwiCol]

Gidday Benny65 & welcome to the forum.  I see Barmy has your sorted for brakes . . .

[Kiwifruit]

Welcome Benny65.
Make sure your rear brake pedal pivot is clean and lubed. They can get quite dry and notch.
Good to have you along 

[Eric GSX1400K3]

Welcome mate

[seth]

 
To all things 1402.
Have a good look about as you'll find any info you need if not just ask 

[VladTepes]

G'day !

[BbigMmac]

Welcome Benny, good choice.....again.

[T 24]

Welcome Benny