Refitting Headlamp into it's housing.

[Milts]

    Having removed the headlamp to refit the Givi flyscreen to my 14.

    I found it challenging to refit the headlamp back into it's housing, i disconnected some block connectors to try and re-route the wiring harness to improve things, with little success.

    What i needed was a photo of the original wiring harness for guidance.....with a search on the net 'Froudy' came to my rescue having posted said photo an another bike forum.

    So i'd like to give a big thanks to Froudy 

   I used that photo and in no time at all my headlamp fitted back a treat, so thanks mate 


   A picture speaks a thousand words

   

[Andre]

@VladTepes @gsxbarmy @Proteous
Fit to be made a "How to" sticker

[Monarchjock]

Page 8-17 of the Service Manual

[gsxbarmy]

@VladTepes @gsxbarmy @Proteous
Fit to be made a "How to" sticker

[T 24]

I have to post a pick of my head lamp cover when I next time open it.
There is "a bit" more electricity than in stock lamp.
Home made nightmare

[froudy]

@Milts

Good to know that I've helped at least one person out

I saw your post and thought "I'll post a photo I took of mine up"...I then realised when opening your thread that it was in fact my photo anyway

[VladTepes]

Next job for me is fitting LED headlight bulb I got from barmy so that photo will probably come in real handy

[The Stumeister]

Sometimes my headlight will pop on 1st time,no issues,no swearing,no btuised knuckles then casually screw it in.....yet some days i have spent at least half an hour struggling then finally have to try and hold it all in with one hand holding tight as i try and get 1 screw in....unreal!!!

[Milts]

      Oooooh Matron !!

[grog]

Never had a problem. Been off/on so many times. Did have a time when thought it was vibrating/buzzing. Fitted rubber all around its rim, PIA getting it back in then. Turned out it was mirror glass vibrating in shell. 

[DP1400]

Sometimes my headlight will pop on 1st time,no issues,no swearing,no btuised knuckles then casually screw it in.....yet some days i have spent at least half an hour struggling then finally have to try and hold it all in with one hand holding tight as i try and get 1 screw in....unreal!!!

Thank goodness you mentioned `headlight` in this post.....for a moment there I thought i`d accidentally logged into another site - again!