indicator connector plug

[KiwiCol]

Here ya go Speedy, (and any other members) a list to as many connectors of various shapes & sizes as you could ever want.

I believe the one for the loom is about 3/4 way down the page, orange (yeah I know) and has part number HB050-2P, cost a couple of dollars each.

https://www.corsa-technic.com/category.php?category_id=125

[seth]

well found col 

maybe this link should be saved on a different thread for easy reference in the future. 

[Speedy1959]

Here ya go Speedy, (and any other members) a list to as many connectors of various shapes & sizes as you could ever want.

I believe the one for the loom is about 3/4 way down the page, orange (yeah I know) and has part number HB050-2P, cost a couple of dollars each.

https://www.corsa-technic.com/category.php?category_id=125

Thank you Kiwi...
Will now hunt the UK to see if by some miracle they are available over here..
Thanks again..

[KiwiCol]

Dave will know how to set that up Seth, I'd assume it's just a matter of saving the link under a new post / section.

[Speedy1959]

Kiwi.....
To me the plug HC050-2P looks more like the correct one..
I have one of the OEM indicators here.. I will try to post a close up photo of the plug

[gsxbarmy]

Once you get your Indicators Speedy, see if you can find a matching loom plug on this site
https://www.corsa-technic.com/category.php?category_id=125

As I mentioned earlier, these guys often have matching plugs for most Japanese bike connectors

[Speedy1959]

Thanks gsxbarmy..
I suppose it wont exactly bankrupt me if I order 5 of both sorts (1 extra for any mishaps fitting them).

Thanks again everyone who helped me with this problem...

Mr Barmy... Can I assume that you too would not be totally happy with a bullet connector fix?

[Speedy1959]

These look like the correct plugs / sockets

http://www.easternbeaver.com/Main/Elec__Products/Connectors/Mitsu_UC/mitsu_uc.html

S.

[gsxbarmy]

Thanks gsxbarmy..
I suppose it wont exactly bankrupt me if I order 5 of both sorts (1 extra for any mishaps fitting them).

Thanks again everyone who helped me with this problem...

Mr Barmy... Can I assume that you too would not be totally happy with a bullet connector fix?

I have no issue with the bullet connector fix Speedy, but given you are looking to try to get yours back as much as possible to standard, then from my point of view, the bullet connector is a good solution, but if there is something better than I think it worth exploring before making a final decision. And plugs are neater and easier than bullet connectors after all....

[Andre]

The PO of my 14 "insisted" on the standard connectors. So he just cut the wire of the original and the replacement indicators. He then  twisted the wires together and secured them with duct tape  To each his own 

[V_i_c_i]

Why you don ´t use original ones?
You can buy it here: www.easternbeaver.com

[Speedy1959]

Why you don ´t use original ones?
You can buy it here: www.easternbeaver.com

Thanks but I have already put up the link to the correct plugs/sockets...
I have ordered both male and female.
Eastern Beaver are in the USA BUT the connectors are coming to me via Japan.
Thanks anyway
S.

[V_i_c_i]

Sorry, read this on my phone. Don ´t see answer above.