indicator connector plug

[Speedy1959]

Hi all.
I am replacing the none standard indicators with the standard Suzuki ones.
The problem is that my none standard ones have been fitted with bullet connectors.
The Suzuki ones I have on order come with little connector plugs.
I assume that the harness side plug isnt available separately?
If not then are bullet connectors an acceptable way of connecting them ?

Thanks in advance,

S.

[Andre]

I see no problem using the bullet type connectors.

[gsxbarmy]

Not for the loomthat I'm aware of. Unfortunately it probably means having to connect via bullets as you say.

However, do have a look down this site https://www.corsa-technic.com/category.php?category_id=125 as often they do matching halves for motorcycle connector blocks, so you may be lucky?

[Tony Nitrous]

On some in the past I have chopped the plugs off original indicators and fitted them to the new one so they are plug and play.

Others I have chopped the mismatching plugs off and fitted universal bullet types.

Both ways work fine.

[Tony Nitrous]

I like the small connectors that can be threaded through a washer or nut when I'm fitting or removing them on some bikes. I do have some nice larger plugs but they don't allow this. I have to thread the wires though and add the plugs after bolting them up.

[seth]

 https://www.demon-tweeks.co.uk/Product.do?method=view&n=462&g=241214&p=176172&d=124&c=4&l=2&utm_source=Google&utm_medium=Base&utm_campaign=Indicators&gclid=CjwKCAjwpfzOBRA5EiwAU0ccN0wIl-9Ds4LlJL3XJgZlo1C-S_t6IsisepfnrhCYfKLpneN2cF7NkRoCh30QAvD_BwE&gclsrc=aw.ds

[Speedy1959]

Thank you all for your excellent replies.

Probably a dweeboidal question but are there differing sizes of bullet connector?
If so errr what size is recommended ?

S.

[Speedy1959]

Seth....
Thanks for the link..
just ordered 2 sets from "Mr Tweek"

[seth]

great stuff glad to help 

i used same plugs to replace none standard indicators on my old Bking a couple of years ago worked a treat

[gsxbarmy]

https://www.demon-tweeks.co.uk/Product.do?method=view&n=462&g=241214&p=176172&d=124&c=4&l=2&utm_source=Google&utm_medium=Base&utm_campaign=Indicators&gclid=CjwKCAjwpfzOBRA5EiwAU0ccN0wIl-9Ds4LlJL3XJgZlo1C-S_t6IsisepfnrhCYfKLpneN2cF7NkRoCh30QAvD_BwE&gclsrc=aw.ds

WRONG CONNECTORS !!!!!!!

Seth - I thought these originally, however, its the plugs on the LOOM (Harness side plug) that the indicator plugs on the new indicators plug into that I understand Speedy is looking for.

The plugs in your link are the ones that fit on the indicator side (not the harness / loom) so will be of no use (as they will be exactly the same as the plugs on the new (original) indicators he has ordered.

@seth
@Speedy1959

[Speedy1959]

Bloody hell.
I've ordered them....
I will see if I can cancel the order.
Thanks gsxbarmy for pointing this out.
You are correct in that the harness side now has bullet connectors and NOT the original plug.

Thanks again

S.

[Speedy1959]

Phew..
just cancelled the order before it was posted from Mr Tweek.
Thanks again for allerting me gsxbarmy.

S.

[Andre]

If you find the plugs that go on the wiring harness, you will still have to get the tools to install them correctly.

Stupid person who replaced the original harness connectors with the bullet type. Correct adapter cables can be found at every corner (Like the one Barmy Seth posted). The harness ones I have not found. They do exist somewhere. If you insist to put the originals in, you may have to make calls to connector suppliers.

The bullet connectors will be fine though. Some electrical tape around them will keep the moisture out. Maybe the plastic cover is shrinkable by heat or apply shrink-tubing if you don't want to use electrical tape.

[seth]

Phew..
just cancelled the order before it was posted from Mr Tweek.
Thanks again for allerting me gsxbarmy.

S.

sorry about that buddy i read your post wrongly .
glad you got it cancelled in time.
after having a think you must be able to get the correct plugs as andre said contact some of the connector manufacturers as see what you can get .

[Speedy1959]

Hi Seth...
I appreciate your help mate so dont worry.
Its me just trying to keep itall original and unbodged!
Its a pity the previous owner didnt used the connector you pointed out.
If it really comes to it I shall just have to use bullet connectors.
Thanks again for your help mate.

S.