Lifting front end

[shanered6]

I have two paddock stands one front one back so i dont need to do all that stuff any more ... for what they cost now its not worth buggering around .

[V_i_c_i]

I made this lift for my bikes...
http://www.motorkari.cz/motorka/?mid=68345&act=moto-denik-detail&ddid=54678

Or here too xD
http://gsx1400owners.org/forum/index.php?topic=2295.0

[Snapey]

I have two paddock stands one front one back so i dont need to do all that stuff any more ... for what they cost now its not worth buggering around .

I hate my front stand because it gets in the way when removing the front wheel so I hardly ever use it. As I posted earlier ... trolley jack & a piece of timber under the exhaust.

[grog]

my mate bought two lifts. welded together. photo is first stage. total lift is axle 1.5metres high. adapts to Diavel, Rocket 3. rocket is heavy but no probs.

[froudy]

Abba stand and two car axle stands under the frame..One either side..
Bits of rubber mat on top so that they don't scratch the frame.
Used on my lads Bandit 600 in this photo with the centre stand..

[shanered6]

thats the same way i used to do it ! 

[ARH]

Thanks to all for the replies.... wheels are now off.   Made up simple wooden blocks to support under the  frame on either side... solid as.