OFF-ON throttle issue

Started by hard road, Saturday, 27 May 2023, 10:54 PM

Previous topic - Next topic

hard road

I was struggling with the OFF-ON throttle issue so set the TPS and the STPS to the factory settings using their own plugs (not the big Gray one) and it still had the issue  :undecided:  so I decided to put it in dealer mode and the TPS was showing low !!!!!  so set it using the dash and its now sorted, bike runs as it should. sometimes its best to let the bike tell you  :grin:   

Speedy1959

Thanks for the info (and PM) hard road.
I will look at "dealer mode" later this morning to see what mine says..
Wont be able to ride till Monday morning though..

Thanks again,
S

grog

Never tried dealer mode, not needed to. What do i do?

hard road

Quote from: grog on Sunday, 28 May  2023, 07:13 PMNever tried dealer mode, not needed to. What do i do?

put it in dealer mode with the ignition on, the mileage will change to fault codes, should say C00. to the left of the C00 their will be a line. it should be inline with the -C00, if its higher or lower it needs adjusting. if you open the throttle the line will rise and drop down when the throttle has returned to idle. 

gsxbarmy

Nothing to do.............all day to do it....I love retirement :lol:

Speedy1959

Quote from: Speedy1959 on Sunday, 28 May  2023, 01:22 PMThanks for the info (and PM) hard road.
I will look at "dealer mode" later this morning to see what mine says..
Wont be able to ride till Monday morning though..

Thanks again,
S

I did test the TPS out using this method this morning and in my case it indicated the centre position in Dealer mode, so I didnt adjust anything.
S

hard road

Quote from: Speedy1959 on Monday, 29 May  2023, 01:33 AM
Quote from: Speedy1959 on Sunday, 28 May  2023, 01:22 PMThanks for the info (and PM) hard road.
I will look at "dealer mode" later this morning to see what mine says..
Wont be able to ride till Monday morning though..

Thanks again,
S

bang on then  :onya:

I did test the TPS out using this method this morning and in my case it indicated the centre position in Dealer mode, so I didnt adjust anything.
S

SMF spam blocked by CleanTalk