What did you buy today ???

[Tony Nitrous]

Saw a yellow today, i dont know which version, had same exhaust as your new Tony, Id like my bike to sound that way.

I didn't like the yellow when it came out but they have grown on me. Very much an in-ya-face yellow and certainly stands out. 

Pretty sure it'd be a later Gen-2, so very similar to mine but with ABS and Brembo's.

[grog]

A bit like TL, not a yellow fan but thats colour id have one in.

[Phill P]

Oxford motorcycle lid lock, just a way to secure the lid when it's hanging off the handlebars, if they really want the lid it won't stop them but hey ho

[Hooli]

Today I've ordered a new rear Avon Cobra Chrome for the tractor. They've gone up £15 since last July when I got the last lot, so £189 today. But free postage on this one so that saved £7.50 compared to where I got it last time.

Can't complain as it'll have managed 10k miles by the time it's definitely illegal. The front still looks like new so can stay on.

[grog]

Another 14 shirt. $23 Ali Express.

[Tony Nitrous]

Not a huge fan of iridium screens.

Amazon to the rescue.





Currently looking for a welded up BTL, some sticky tyres to replace the Angel-GT2's and a 2 bike trailer, although my funds are currently somewhat limited.

[grog]

Today, paid for more tradies building new bathroom, bike stuff expensive, nowhere like bathroom stuff. Gives me a lot of points for no complaint bike stuff. 

[Eric GSX1400K3]

Today, paid for more tradies building new bathroom, bike stuff expensive, nowhere like bathroom stuff. Gives me a lot of points for no complaint bike stuff. 

in my experience you only ever get 1 brownie point, revocable at anybtime, regardless of right or wrong or expense involved.

[Dwain Dibley]

just got me a 24 mm front axle allen socket and a 1/2" drive breaker bar.

You can't have enough tools.

D.D.

[Tony Nitrous]

2 more 3m x 125mm posts and 4 bags of rapid set.

2 more posts concreted in, cut to height and oiled.
Thats 9 posts, 3 x 3.  2 more posts and I'll start fencing the hens half.  It'll need a further 2 posts to fence the veggie side.  Both sides need doors / gates. Just slowly chipping away at it. I'm intentionally only doing a small amount each week as the previous fences hurt my body and wallet.  Winter starts here in 10 days time, so it's probably a better time for digging and fencing, and good timing to get it ready for the coming Spring / Summer.

[Tony Nitrous]

A...



B...



C...



Even though I have the correct tool, I probably use "B" the long-nut the most. It's actually for joining lengths of threaded bar for bracing up timber house frames, I think Bunnings / DIY stores sell them, I have a heap in a bucket. Fits some of my spindles great and easy to put a socket, ring spanner or rattle gun on.

[Eric GSX1400K3]

Thought those joiners were 1" so too big for our 24mm axle internal hex bolts

[Tony Nitrous]

Thought those joiners were 1" so too big for our 24mm axle internal hex bolts

As you can see, the ones I have are a perfect fit. I guess they come in different sizes but we only used those.

EDIT: I'm not going back out to the shed tonight, but looking at the Bunnings website....

[Eric GSX1400K3]

Awesome. I have option C and A, used C on both my bikes, works a treat.

[grog]

Might have to visit Bunnings, i have a homemade one but its gone into hiding. Keep one, put other 3 on E Bay, Suzuki special tool, $30. 😂