Post a Pic of your Bike..

[Yetiman]

Hey,
Thought it would be cool to get some pic's of peoples bike's on a ride all different places round the world,
Here's mine In Riverina-NSW-Aust; you see a place/Mountain in the Back ground called "The-Rock"..
Mine's a ( 5/08 K7 model )..

[Tony Nitrous]

QLD AU.

2008 model (The REAL Final Edition)



Go's VERY well, Full Yoshi system, PAIR blanks, dyno mapped PC111 etc.  Looks rough, bought as a crashed bike.

1st pic is the back way to QM Falls I think, others are Mt Mee lookout.

[Speedy1959]

Taken on a well known route for Bikers called "Buttertubs Pass"

https://www.yorkshiredales.org.uk/places/buttertubs_pass/

[Speedy1959]

Sunset at Knott End Bike Meet..
Excuse the slight modification in Photoshop...
The bike and the venue are real !

[T 24]

Hi,
Here is my K2 with full JSR system, and my wife's 2001 XJR, and my son's 1998 ER5.

[Eric GSX1400K3]

QLD AU.

2008 model (The REAL Final Edition)



Go's VERY well, Full Yoshi system, PAIR blanks, dyno mapped PC111 etc.  Looks rough, bought as a crashed bike.

1st pic is the back way to QM Falls I think, others are Mt Mee lookout.

What's with the margarine container replacing the headlight?

[Tony Nitrous]

QLD AU.

2008 model (The REAL Final Edition)


Go's VERY well, Full Yoshi system, PAIR blanks, dyno mapped PC111 etc.  Looks rough, bought as a crashed bike.

1st pic is the back way to QM Falls I think, others are Mt Mee lookout.

What's with the margarine container replacing the headlight?

As I said, it was crashed when I got it. I'm a fan of the original GSX, the ET's and EX's. I have a couple and a heap of spares. I'm not the first to use the light and cowl on a 14, others have done it including some on here.  It's not to everyone's taste, but the bike cost me $1500 using what I have to put back on the road and I'm happy with it.  I was going to change it but probably won't bother now.

My ET



It was always going to get restored or tidied up but once it got put back on the road it just got used. I have other bikes I'm equally passionate about and this one is a good, fun, reliable ride as it is....

[Eric GSX1400K3]

Cool, it works with the bike, I just hadn't seen those ET lights before.

[Tally]

Mine in a mild state of hooliness 

[Notty]

Un Hooli - extra low seating 

[paulr5604]

Mine which was my fathers. Took my daughter out for her first ride.

[Tony Nitrous]

Cool, it works with the bike, I just hadn't seen those ET lights before.

[black14]

My 2008 on Skyline Road, Eildon yesterday.

[Westcraigs]

Re the GSX1400 and a bikini fairing, as a young man in the days of the GS1000S Wes Cooley era, the only style of fairing for me had to be the GS1000S.

I was well aware of all the fitting difficulties with trying to mount the GS1000S fairing on to the GSX1400 (I also think the GS1000S fairing is a bit big and bulky - showing its age basically), so I managed to get hold of a slightly smaller secondhand GSX400S Impulse fairing, which I think are quite hard to find.

Apart from fabricating a general mounting bracket (see photo - which took a lot of patience to keep trial fitting after bending and tweaking etc), I only had to make new offset brackets for the two horns (i.e. essentially as standard but offset by about 15 -20mm further back from the front of the bike because the fairing fouled the horns on full lock), and also offset brackets (see photo) to allow the indicators to align correctly with the curved cut outs on the fairing.

I think the GSX400S Impulse fairing has worked out great in terms of fitment and on balance looks just right for the bike.

Oh nearly forgot, I also took the opportunity to get a 7" steel headlamp bowl to fabricate and install a 55W HID Bi-Xenon headlight into it and for the first time in all my 45 years of motorcycling, I have a great headlight.

[Globalrider]

Posted this before - But love it as not trying to get the effect - it just happened with the camera coming out from the cold into the warm