Crescent Limited Edition

[ibrakeformoose]

Just picked this one up.. Yoshi cams, Cyclone, Ohlins, (allegedly blueprinted) and loads of other bits and bobs..

Apparently only 9 made, with Paul Denning keeping one for himself, came with certificates and build sheet.

Anyone else seen one/have one??

[Del]

that is a nice bike fella as you say seat not my cuppa either - can you not just buy a cover and recover it

Del 

[gsxbarmy]

Very nice - first I've seen / heard of that special. Been kept very tidy as well by looks of things, but I can see why you want to change the seat

[GSXKING]

Blueprinted motor would be interesting to confirm 

I did that on a HD Roadking when I lunched a lifter. Worth the $7,000 spent. HP from 58 to 88 and loads more torque. 

Where the flames already on it ? 

[ibrakeformoose]

I have the build sheets and documentation from Crescent, so it does says blueprinted (as well as all the other stuff) and the cylinder head is engraved with the signature of the tech..

Yes, the flames were on it from new.. all lettering is proper gold leaf too..

The fuel pump failed which is why the seller chose to get rid of it and his local dealer fitted a used one, removed the Power Commander and kept it.

I rang the and they told me they threw it away as it wasn't working properly (likely story!!)   

[Chelsea]

Had one a few years back but normal K3 Colour scheme, spec was similar, Yosh cams Power Comander, and Cyclone exhaust , Ohlins rear shocks and uprated fork springs , same front screenetc,  all with Crescent paperwork from new[/img]
Very nice spec and well set up , saw it on Ebay, you got yourself a bargain

[ibrakeformoose]

Good to know of another one.. do you remember if yours had an engraved signature on the cylinder head too?

[Chelsea]

Sorry can't remember, don't think so, chap I got it from bought it new and Crescent supplied it with all the original parts as well so he had brand new shocks, Cams, Exhaust etc all in a box. Be good money in that little lot now 😁

[froudy]

Nice looking bike @ibrakeformoose 

I can't rate Crescent Suzuki highly enough. I popped into their showroom while down in Bournemouth many years ago for some help with fitting GSX-R digital clocks to my Mk1 Bandit 1200 build. Bare  in mind, Fowlers of Bristol had already told me it wasn't possible to fit them for a number of reasons. One of their Techs took the time to sit down with me and go through wiring diagrams which he photocopied and gave me at no cost. The clocks were duly fitted and are still working to this day. Brilliant service!

[Mick_J]

They're not called foulupps for nothing. 

[froudy]

They're not called foulupps for nothing. 

They live up to their nickname too..Time and time again!