Wiring heated grips

[Snapey]

I bought something similar to these & need some translation of the instructions below.
http://www.ebay.com.au/itm/Universal-Motorcycle-Heated-Hand-Grips-Warmer-Kit-Suzuki-Yamaha-Honda-Kawasaki-/311596930477?hash=item488c9fd5ad:g:SRQAAOSw~1FUVH3C

Motorcycle Electric Heated Grips Handle.

1. In the electrothermal handlebar on adjust to need to install the seats propyl.
2. Tape evenly the electrothermal fixed (twining) to handlebar, particularly the contacts with electrothermal place.
3. Cover on the outer casing, adjust seat, use sirocco gun (plastic welding torch) first uniform blowing outside of the casing pipe two crease until contraction so far, reoccupy sirocco uniform gun uniform blow to other parts of the outer casing, until the casing each part of a uniform, level off so . Contraction.
4. The switch installed in the rearview mirror under the rod.
5. Pick up good power supply cord, red, blackline regardless of is negative, but must meet by key in the door control line.

Now if you understood that then you're a better man that I am Gunga Din.

[KiwiCol]

Geez! that's a load of crap. Does ones head in just trying to decipher and interpret it.

[Notty]

Thermal gloves need no instructions !

[KiwiCol]

What ya putting heated grips on for Snapey?  Thought you Aussies would be putting Cool Grips on instead?

[Kiwifruit]

Snapey....sounds like are you replacing a heat tile on the Space Shuttle ??

[froudy]

Snapey...
Seriously mate I would drop them in the bin rather than risk incinerating your GSX1400

[Mrg]

  I was lost after the thermal eletroc handle bar thingy   

Two pair of gloves and go for it 

[VladTepes]

hehe that's the worst Chinglish I've ever seen !

I suggest you the dictionary piece looking. In chinese transplant the England man head thinking. be care to not underhand the overheads and dog kitten kitchensink abalone.  Luck goodness.

[Mick_J]

That's why they are so cheap, they saved on the translation costs. 

[Kiwifruit]

Dog kitten.....sounds like #27 on the menu at the Lucky Horse Takeaway.

[VladTepes]

Dog kitten.....sounds like #27 on the menu at the Lucky Horse Takeaway.

or perhaps the UNlucky horse...

[VladTepes]

@Snapey

Hopefully this might be of use to you.

http://www.instructables.com/id/Install-Heated-Grips-on-Your-Motorcycle-or-ATV/


edit: Actually just realised the above is for 'proper' grips as opposed to generic type.

Some similar but perhaps slightly less worse instructions for you...

1.Place the heat plate on the right position
2.Wrap the heat plate around to the handlebars evenly，especially at the junction with the heating plate.
3.Put on the jacket tube and adjust the position,using a hot-air gun blowing outer sleeve shrinkage uniformity.
4.Mount the switch in the rod of the rear view mirror
5.Connect the power line.Line Red and Line Black are not divided into positive and negative,but must installed in the line control by the key door.

and some definitely much worse ones...

Wiring Instructions:
A pair of two pieces,use a long wire of the one piece to connect the short wire of another piece, the last remaining two lines connected to the positive and negative.

[VladTepes]

@Snapey  these should definitely help !

https://www.youtube.com/watch?v=Qn00DrapB1A

hopefully you can reuse the old grips

https://www.youtube.com/watch?v=UjRNcoqhsCs

[Snapey]

Thanks for that Michael. I'll be able to sort it out but just for the hell of it I'm taking the instructions to a Chinese mate to give him a laugh. They're going on the straight bars BTW, the Pro Tapers have good ones already fitted.

[VladTepes]

Make sure you let us know what your Chinese mate comes up with....