Alternate Oil Filters

[seth]

I think with our short service intervals(4000 miles).
That any good quality oil filter is good .
I like the idea of the k&n's with the nut on it especially for people that don't have the correct oil filter tool.

[Notty]

I think with our short service intervals(4000 miles).
That any good quality oil filter is good .
I like the idea of the k&n's with the nut on it especially for people that don't have the correct oil filter tool.

that nut makes it so easy to take off 

[BlueDragon]

Race Performance filter has a nut on the end like K&N.

Part number RP138 for the GSX1400.

Available from SuperCheapAuto

This is what I come up with at SCA for the RP138. https://www.supercheapauto.com.au/p/race-performance-race-performance-motorcycle-oil-filter---rp138/424881.html

Yeah, that's not the filter that I bought.  The one I bought is just like the standard filter.  So they must have put the wrong pic on the website

[Tony Nitrous]

Race Performance filter has a nut on the end like K&N.

Part number RP138 for the GSX1400.

Available from SuperCheapAuto

This is what I come up with at SCA for the RP138. https://www.supercheapauto.com.au/p/race-performance-race-performance-motorcycle-oil-filter---rp138/424881.html

Yeah, that's not the filter that I bought.  The one I bought is just like the standard filter.  So they must have put the wrong pic on the website

[grog]

Ryco from Repco wholesale price less than $8. Dont have the nut but i have the cap tool.

[T 24]

Suzuki original oilfilter cost here 12€, so original filter and new oils after every 5000 km.
Oils+filter are still the cheapest way to protect your engine.

[Tony Nitrous]

Suzuki original oilfilter cost here 12€, so original filter and new oils after every 5000 km.
Oils+filter are still the cheapest way to protect your engine.

[KiwiCol]

How much do you pay in Aussie Tony?

[Tony Nitrous]

How much do you pay in Aussie Tony?

Can't remember to be honest.

They fit several of my bikes so I buy a few, and some crush washers, and O-rings to remove my oil cooler line when I'm picking other stuff up and have them sat in stock.

[Andre]

OEM filter at Robinsons currently on sale for £6.59

[grog]

New oil and filter. Youre best friend.

[Globalrider]

Spring is on its way and then an oil/filter change on the 14 - In going trough my stock, I found a Fram PH6018 and looked up the cross reference and it says yes to a KN-138 - anyone got thoughts on this?
Cheers

[grog]

If it fits Mate, use it. Fram are quality filters.

[Roo]

Ryco from Repco wholesale price less than $8. Dont have the nut but i have the cap tool.

Having the cap tool does that avoid either taking the header pipes off or oil lines etc ?   getting lazy in old age !!!!!   lol

[seth]

Ryco from Repco wholesale price less than $8. Dont have the nut but i have the cap tool.

Having the cap tool does that avoid either taking the header pipes off or oil lines etc ?   getting lazy in old age !!!!!   lol

Yes and with standard or akroprovic downpipes dead easy .
Yoshi downpipes have always made changing the filter a pain .

On the subject of oil filters as our changes are such short intervals (I change the oil filter again every oil change) any good quality one does normally a champion or hy-flo from halfords.