Bottom adjuster screw on front fork leg

[Gsxjohn]

Need some help/advice, I'm stripping down my front forks for powder coating. How does the bottom adjuster screw come out? I've unscrewed it and can see the 'o' ring but it won't come out.

[gsxbarmy]

k2/3/4? Im not sure the screw is intended to come out. Others may know better than I though

[Dusty ST]

I think there's a pin to pull out, not sure how you'd do that though, as it's pressed in to a blind hole.
Easy enough to fit though !

[Gsxjohn]

Well you can't buy adjuster valve separately. Suzuki want £400 for bottom leg and only used ones were £350 + £60 postage.
Nothing for it than make one. Luckily a guy at work is a toolmaker and into bikes. He's drawn it out with dimensions. I'll get a copy and post it for info.

[T250]

I think what your after is in this link?

http://gsx1400owners.org/forum/index.php?topic=340.0

[Gsxjohn]

I read that thanks, one of the adjusters on mine has the thread stripped. Short of replacing the whole fork leg making one was the only option.