Power commander 111

[Ktmjunkie]

Hi all
I've neglected my 14 for a couple of months since I brought my 990.. I thought I had better start the old girl up. Turns over great but doesn't even try to fire,  so check all the obvious, kill switch, clutch and side stand switch. No FI light just won't fire.
Then I read about a problem richard has with his so I by passed the power commander , Bingo , fired straight up. So why do these things fail it's only been stood there a while. I read that Q can't do much with these as they are packed in resin. So anyone got one kicking about they want to sell me ??
Put it back in line after she started and nothing so deffo the PC.

[seth]

Contact powercommander/dynajet customer service they should be able to sort it and if not give a massive discount on a powercommander v as pc111 no longer available.

They say they can't go wrong so will repair or replace when they do go wrong.

Always worth a try anyway.

[Andre]

How about corrosion of the connectors? Give contact spray a try.

[Ktmjunkie]

I've sent Dynojet a email, we will see what they say. Connections all look clean and good.

[gsxbarmy]

If not Gordon try re-loading the firmware (I've put the link in Richard's thread) - assuming you have the original map stored. But hopefully Dynojet will sort you, they are (or were) pretty good

[Ktmjunkie]

Cheers Dave, after a couple of emails to Dynojet, they have asked me to return the unit to them. Watch this space.

[seth]

Good luck
following with interest as I have one of the earliest pc3 usb  and a pcv so if they go wrong be handy if another orgster has had a problem resolved .

[Ktmjunkie]

Seth
I willlet you know the outcome.

[seth]

Cheers buddy
Just make sure you keep a back up of your map with you in case they replace the unit or have to wipe it to repair it .

[VladTepes]

Or if you don't keep the map... great excuse to get a proper dynotune done.

[Hooli]

Hmm that reminds me, must download the map off mine to my new laptop as I can't find the old backup.

[Ktmjunkie]

Well, superb customer service from Dynojet UK . 5 days after I posted it off it arrives back on my doorstep. Latest firmware loaded and new ground cable as earth path was significantly damaged.
Best bit is no charge. Now fitted back to bike and seams to be running good, will take it out at the weekend.

[seth]

Great result good to know they still looking after there customers

[gsxbarmy]

Excellent result 

[Mick_J]

Excellent result