Rear Axle

[Buddynq]

I assume there is another  Allen Key type one for the front wheel??

[grog]

just find a nut that fits, put a bolt in it. weld toether.

[KiwiCol]

That's just what I did ages ago Grog. Cheap n effective.

[gsxbarmy]

I assume there is another  Allen Key type one for the front wheel??

Cheaper still - use what is in your standard tool kit already! In there you'll have a spark plug wrench and also a 24mm spanner. Put spanner over the spark plug wrench, and insert the spark plug wrench into your front axle.

Or find a bolt, weld a nut etc as Grog suggests

Or purchase a 24mm Allen bolt - you can get them through eBay
http://www.ebay.com.au/itm/24-mm-front-wheel-removal-tool-for-Suzuki-GSXR-K6-K7-K8-K9-K10-BMW-S1000-RR-/171016410725?hash=item27d15f5665:g:oVoAAOSwo4pYGEH8

[Tony Nitrous]

Scroll down....

http://gsx1400owners.org/forum_test/index.php?topic=1127.45

[KiwiCol]

24mm Hex bar off cut, if you're in the know.

[Tony Nitrous]

My rear wheel socket is 3/4" drive.
A black "impact" socket that I normally use a 3/4 to 1/2" adapter on.

Wasn't cheap but quality and fits a few of my bikes.

Obviously it was bought for work and its pure coincidence it happens to fit my bikes...