front brake discs

[longo]

  hi all
        is there any other discs (front) that fit the gsx1400 which fit straight on mot guy reckons mine are warped which will fail next mot grrrr
              many thanks in advance
                                  steve

[seth]

check the listings in other aftermarket brake disc suppliers listings
they'll share part numbers for disc's that are the same .
so disc's that share part numbers for different bikes will be the same.

[gsxbarmy]

Busa front discs are the same

[T 24]

Older busa, gen 1, ´99-´07, discs are the same.
Gen 2, ´08-> is different.

[seth]

Note as just found that bking(310mm) discs are 10mm smaller than the gsx1400(320mm)
As when mounting the brakes for the upside down front end the caliper fouls the disc .
Luckily there is a standard mount kit (5mm spacer)to make everything fit as it should (ebay is my friend).

[Mick_J]

  hi all
        is there any other discs (front) that fit the gsx1400 which fit straight on mot guy reckons mine are warped which will fail next mot grrrr
              many thanks in advance
                                  steve

I got some EBC disks from Demon Tweaks last year for mine, they list them for the 1400 so should be easy to find.  I had the same issue with last years MOT, is it on both disks?

[Hooli]

I've got cheap Zone discs, once I tried different pads they work great. They don't like EBC pads but perform excellently with the dirt cheap Frento pads off Wemoto.

[Mister Fishfinger]

Same here, I had an MOT advisory last year - and to be fair, the brakes were a bit vibey.

Fitted a pair of EBC disks and pads, very happy with them.

[froudy]

I assume that the brakes are pulsing when you apply them?
This is usually caused by stuck caliper pistons. Discs very rarely warp.. I rebuilt my 4 pot Tokico's and freed off the seized disc buttons and they're ok now.
Have a read of this article...

http://blackshadow-uk.co.uk/Fitting.html

[Hooli]

I warped my original discs. Once the calipers have stuck pistons, just ride flat out till your brakes totally fade as I did at the Inchnadamph MCR & you'll warp the disks.