Excessive tyre wear

Started by GSXKING, Thursday, 02 July 2026, 11:43 AM

Previous topic - Next topic

GSXKING

So my BMW rear shock decided to lose all rebound a while ago. It was obviously progressive as once it gave up I was pogo stick riding home, solo fortunately.
Anyway I had the Wilber's upgrade done by Alex @ Skinny's Garage and it transformed the handling of the bike.
Now I'm not normally a tight arse lol 😂
In the pics it looks I've been to a trackday. However I assure you it was the premature wear caused by the failing shock, then riding with the refitted Wilber's giving a much better feel to the edge grip.
I'm taking the wheel to my tyre guy, Stu @ Rising Sun motorcycles in Capalaba. Going to go back to a 190/50 Road 6 with the newfound confidence in the rear grip.
We're headed to Tenterfield Bowls Club for our 20th year of Christmas in July on 25/7. Should be scrubbed in before then hopefully 🤞
GSXKING 3:^)
Chris
Best allrounder I've ever owned 👍

GSXKING

I just located a puncture repair I did on the side of the road when the tyre was only a few hundred kms old. I'd actually forgotten about it.
Call me Chris McTavish 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿 aye too the noo 😳😳
GSXKING 3:^)
Chris
Best allrounder I've ever owned 👍

Eric GSX1400K3

Same here Chris, had the WP shocks for the K1300GT rebuilt by Rads, transformed the bike, Wilbers is next level, but 3500 for a set (F&R) is too much for me, unless I can find a decent 2nd hand set.

The Michy PR2's are wearing well, fronts a bit scalloped. Will get Avons next, my tyre guy can get them in about 2 weeks.
I try to take one day at a time, however sometimes several days catch up with me at once.

KiwiCol

Good Ole string puncture repair, they really last, not just a temp plug.
😎  Always looking for the next corner.  😎

Globalrider

Last ride - I got a rear flat - plugged it (string) and it held all the way home and tested this morning - still at pressure. Now considering remove the tire and patch from the inside - Issue is here many shops won't do it - got to search around as the tire is not that old. Still lots of tread and the puncture was in the meatiest part of the tread.
:hat:
Stan
I need to go somewhere I've not been but won't know until I get there!

Hooli

My record is 5 bits of string in one tyre. I remembered how many were in that rear tyre after a "test day" when I confirmed my old 14 still pulled just off the clock when asked.

KiwiCol

Quote from: Globalrider on Thursday, 02 July  2026, 01:26 PMLast ride - I got a rear flat - plugged it (string) and it held all the way home and tested this morning - still at pressure. Now considering remove the tire and patch from the inside - Issue is here many shops won't do it - got to search around as the tire is not that old. Still lots of tread and the puncture was in the meatiest part of the tread.
:hat:
Stan


Why won't they do it Stan?  Nowt hard about it?
😎  Always looking for the next corner.  😎

Tony Nitrous

Quote from: Hooli on Thursday, 02 July  2026, 04:14 PMMy record is 5 bits of string in one tyre. I remembered how many were in that rear tyre after a "test day" when I confirmed my old 14 still pulled just off the clock when asked.

I don't think I've ever ran more than 1 !  :worshippy:

I can confirm that my previous H2 didn't go any slower with one though.  It was still in there when I sold it.



I find a mix here, some shops will plug a tyre (tyre off, from the inside) others won't. Not sure about fronts, mine are normally rears.
.

Hooli

It's mixed over here too. Some claim it's illegal to plug a Z rated tyre (it isn't) others are happy to do it.

Kiwifruit

Some here won't do it if they say it's to close to the sidewall.
Another great day on the right side of the grass.😎

grog

Temp emergency repair in Queensland. Only to get to repair place. So I guess the answer if asked, I'm on my way to tyre shop👍

Hooli

Quote from: Kiwifruit on Friday, 03 July  2026, 02:25 PMSome here won't do it if they say it's to close to the sidewall.
Aye same here and on cars too. It needs to be near enough flat on the inside for their mushroom shaped bung to seal too.

Irish in Oz

I have plugged them and rebalance them at home, I bought a balancer of ebay years ago for about $30 AUD.
One only had about 500k's on it and got about 8,000 out of it Perelli GT.

Mr Gee

Quote from: KiwiCol on Thursday, 02 July  2026, 04:41 PM
Quote from: Globalrider on Thursday, 02 July  2026, 01:26 PMLast ride - I got a rear flat - plugged it (string) and it held all the way home and tested this morning - still at pressure. Now considering remove the tire and patch from the inside - Issue is here many shops won't do it - got to search around as the tire is not that old. Still lots of tread and the puncture was in the meatiest part of the tread.
:hat:
Stan


Why won't they do it Stan?  Nowt hard about it?

Money is the answer to that one, pure and simple.  :onya:

Rather sell you a new one.   :salute:
Mr Gee

SMF spam blocked by CleanTalk