Author Topic: Yoshimura end can question  (Read 392 times)

Offline Blubber

  • Forum Donor 2018
  • Torque Master
  • *****
  • Posts: 1105
  • Total likes: 398
  • Location: Ijmuiden
  • Country: Netherlands  
  • Gender: Male
  • K2 with a nebular black dressing
Yoshimura end can question
« on: Tuesday, 11 September 2018, 01:49 am »
Does anyone know if the Yoshimura slip on  exhaust... The one with twin exit for a stock system...  has 2 cores?

Or how the inside looks like?

Answers on a postcard  :smitten:

TA
Wreck-it Richard - one of the unDutchables

Offline seth

  • Forum Donor 2018
  • Torque Master
  • *****
  • Posts: 3249
  • Total likes: 1388
  • Location: north east scotland
  • Country: Scotland  
  • Gender: Male
  • Angus near Dundee
Re: Yoshimura end can question
« Reply #1 on: Tuesday, 11 September 2018, 01:56 am »
I don't but I know someone who going to be cutting 1 up very soon as he has a damaged one and he's going to cut it down .
 :cheers:
only a slightly modified gsx1400
oh and a standard one too

Sethbot Postwhore

Offline shanered6

  • Forum Donor 2018
  • Road Warrior
  • ****
  • Posts: 517
  • Total likes: 347
  • Location: Aberdeenshire , Scotland
  • Country: Scotland  
  • Gender: Male
  • Made in wales live in scotland
Re: Yoshimura end can question
« Reply #2 on: Tuesday, 11 September 2018, 02:12 am »
I have one on mine and as far as im aware it is single core ... just has a twin outlet .
i intend to live for ever or die trying !!

Gsx 1400 k6 , Thunderace 1000 .

Offline Blubber

  • Forum Donor 2018
  • Torque Master
  • *****
  • Posts: 1105
  • Total likes: 398
  • Location: Ijmuiden
  • Country: Netherlands  
  • Gender: Male
  • K2 with a nebular black dressing
Re: Yoshimura end can question
« Reply #3 on: Tuesday, 11 September 2018, 02:23 am »
Thanks

Ideally I would like to have a 60mm core... Doesn’t matter if that's for one or two cores.... And this one sprung to mind.
Wreck-it Richard - one of the unDutchables

Offline shanered6

  • Forum Donor 2018
  • Road Warrior
  • ****
  • Posts: 517
  • Total likes: 347
  • Location: Aberdeenshire , Scotland
  • Country: Scotland  
  • Gender: Male
  • Made in wales live in scotland
Re: Yoshimura end can question
« Reply #4 on: Tuesday, 11 September 2018, 06:50 am »
I wil nip over to the shed tomorrow and check it is single core and the diamiter of it and get back to you .
i intend to live for ever or die trying !!

Gsx 1400 k6 , Thunderace 1000 .

 

anything