YSS or Hagon rear shocks

[Andre]

Must have been @V_i_c_i

Don't know why the @membername doesn't work in my posts.

Can't find the post either (lots of his pics don't show).

Did find a pic of his mod here: https://www.rajce.idnes.cz/v-i-c-i/album/gsx1400-org-photos

[grog]

Thanks Andre. Its a great mod. I just dont know where to start to get them made.His look so perfect.

[DTTW]

Oh that's one nice mod!

Would like to know more about this, what needs to be done, what parts are required to resources etc. The stock preload seems bit of a gimmicky to me.

[Andre]

The stock preload seems bit of a gimmicky to me.

Except for mono-shocks, where it might be difficult to reach, imo the hydraulic adjusters are all gimmicky.

I'd start by taking the gimmick off and taking measurements. All the needed parts might be available online. Otherwise find someone with a lathe who is willing to do the threaded part.

[Will14]

UK based but these may be worth a try for the seals & O Rings, I used to use them when working in the Hydraulic industry, strip a Hydraulic Cylinder/motor pop all the seals in the post to them and a week or so later a full set of seals would arrive for very little money

https://www.fpeseals.com/seals/piston-seals?gad_source=1&gclid=EAIaIQobChMI2I7-rLnjhgMVgJBQBh1lFgT7EAAYASAAEgJvUfD_BwE