Clocks plug pin out diagram for upgrade.

[Fula28]

So I'm swapping my clocks on my fighter 14, and I've lost the pin out diagram for speedo /clocks. Anyone have one saved I could use please.   

[KiwiCol]

@Tony Nitrous may be able to assist here, I know he's swapped his clocks.

[Tony Nitrous]

I used a stock GSX clocks plug on my KOSO dash but I don't think I have a copy of the pins function anywhere.

I did find some info on the net, I think someone on the old forum helped me too, and I did the easy stuff with a multimeter and some trial and error.

Mine was done several years back and hasn't been looked at since,
but If I can find any info i'll Post it up.

[Fula28]

Thanks gents, I did find the piccy on old post but it's way grainy and hard to work out! Still waiting for koso clocks so, maybe have time with multi meter tonight! Cheers Mark,

[Fula28]

Thanks gents, I did find the piccy on old post but it's way grainy and hard to work out! Still waiting for koso clocks so, maybe have time with multi meter tonight! Cheers Mark,

[Tony Nitrous]

The only thing I didn't wire through the plug was the speedo.

I did wonder if I could use the stock 14 reader / feed, but never got around to trying.

My Koso doesn't use a glue'd On magnet like some others do,
I just ran 1 wire down the front brake like and a little sensor counts the disc bobbins on mine.

[ogrimark]

I kinda found most of these using a really pants wiring diagram but got stuck on my koso clock trying to wire up the FI light. Did anyone have any luck with this? i figured that it would get put to the engine light on the koso but it just flashes.