New to the 1400

[BbigMmac]

Welcome! Advice: don`t read to many threads....makes you want to make a whole lot of changes

[seth]

I'd recommend getting used to the bike before anything .
Then do the quick stuff
4°ignition advancer and pair's removal.on both my k2 and the later k5 and k6 much smoother running(no power gains)
Then if your looking for more a full exhaust system and powercommander v (the pc3 is no longer available new)around 115bhp)
On my old k2 these mods made a massive difference to the bikes running(smother) and with exhaust mods slightly more power and better fuel economy.
On my later k5/6 they made it slightly worse on fuel but gave a little more power .


You'll only need a powercommander if you do any exhaust changes.

Once I fitted the yoshi cams the bike fully came alive and it what I think it should have always been from day one.(136bhp)

Loads of info here
Good luck
Seth