Remove the PAIRS System

[V_i_c_i]

My system of removing PAIRS ...

[Simonic]

After running with the PAIRS blocked off for a while I've taken the plunge and ordered this blanking set.
https://www.ebay.com/itm/253623301434?ViewItem=&item=253623301434
I'll report back when fitted

[seth]

Sane kit I fitted to our 3 bikes I've also used the same kit on other 14's it's a good quality kit.

[Simonic]

Bought the Smartmoto Pairs delete kit. Fitted it yesterday.

[seth]

How does the bike feel with it fitted .
It should be slightly smoother

[Simonic]

How does the bike feel with it fitted .
It should be slightly smoother

I had a bit of a problem with the bike popping thru the nearside exhaust on tickover , I nipped the pairs system off following some advice on here and it cured the problem. The tickover is much better now. The bike does have some other running  issues s i'm not seeing the full benefit as yet.
The kit supplied is excellent tho and it was with me in three days

[Pannum]

Thinking about removing the pairs, just a quick question first. Having the bike already had a custom dyno will this affect that at all or should it be all good to remove?

[seth]

The pair's system will have been cut off while the bike was dyno'd so removing it will not affect anything.

[Pannum]

 

[Rh4000]

Ordered, next job on the list

[Latetsorpa]

Superb thread. And beautifully documented. Cheers!   

[V_i_c_i]

Superb thread. And beautifully documented. Cheers!   

Thank you.

BR Vici

[Tony Nitrous]

[Mrg]

Well taken care of  finger nails mate 

[KoZi]

Do anyone have a dimensions of plate which I have to do to replace the reed valves ? I bought a kit which is upper in post but it doesn't have a accesory plate - only the top.
I want to remove this and fit it quickly so I will do the plates earlier. Steel plates - 2mm, but height, width and radius?
I will be thankfull for infos