What did you buy today ???

[KiwiCol]

If I had the money to buy a Triumph... I wouldn't.   No, a Honda ST1300 for me!!

I know nothing.

[GSXKING]

The new iteration of Rocket 3. I'm not sure why 

[Tally]

Today I bought a pair of axle stands , a pair of replacement L cups for my rear paddock stand and a second tubeless tyre repair kit for my car ,( the others on the bike). Tomorrow a 22mm socket for the front wheel insert so I can torque up to the proper setting , rather than 3grunts.

[DP1400]

You`re not alone Vlad.....!

[Eric GSX1400K3]

Today I bought a pair of axle stands , a pair of replacement L cups for my rear paddock stand and a second tubeless tyre repair kit for my car ,( the others on the bike). Tomorrow a 22mm socket for the front wheel insert so I can torque up to the proper setting , rather than 3grunts.

Hi Tally, i bought this one for the front axle: https://www.ebay.com.au/itm/17-19-22-24mm-4in1-Motorcycle-Front-Spindle-Nut-Hex-Key-3-8-Dr-Socket-Yamaha-/202140280690?_trksid=p2349624.m46890.l49286

[Tally]

That's what I have also

[grog]

Thats a flash tool, mines just a nut welded on old 1/2 inch drive socket.

[seth]

Suzuki do actually sell the correct thing to remove the the front axle and it's cheaper than most if the aftermarket solutions.
I keep 1 under the seat as it was less than £5 from my local Suzuki dealer years ago .

[KiwiCol]

How can £5 be cheaper that a nut welded onto a bolt?

[seth]

It's not col
I ment the genuine Suzuki tool is cheaper than most of the aftermarket ones you can buy and it's better quality too .

[gsxbarmy]

All the best people have Triumphs.

That means Barmy's out . . .

Yeah thanks for pointing that out Col 

[Irish in Oz]

A Henry Hoover Wet & Dry for the shed. Now the missus wants it because it sucks better than the Dyson.

[Del]

more parts from Japan for the ZRX1100

[Big Phil]

Bagster Cover and Bag (rucksack) bought off EBay like new condition🤗

[Kiwifruit]

Happy deal