New member

T250 · Tuesday, 01 May 2018, 11:23 PM

Hi, just joined after taking ownership of a very sad and neglected K2

total strip and start again job...

Latty66 · Tuesday, 01 May 2018, 11:47 PM

Welcome aboard mate stick some pics up

Andre · Wednesday, 02 May 2018, 12:03 AM

Welcome

seth · Wednesday, 02 May 2018, 12:15 AM

To all things 1402
There's loads of info and help so get stuck in and bring your bike back to good condition
Good luck

T 24 · Wednesday, 02 May 2018, 12:29 AM

Welcome T250!

ARH · Wednesday, 02 May 2018, 01:56 AM

Welcome..

Del · Wednesday, 02 May 2018, 03:28 AM

Hi Welcome to the forum T250 - plenty of knowledge on here to assist with rebuild mate

Del

KiwiCol · Wednesday, 02 May 2018, 03:36 AM

Hi T250, welcome to the club.

lil4399 · Wednesday, 02 May 2018, 04:13 AM

Bienvenue!

By the way, my first bike was a Villiers 250T (close to T250)

KiwiCol · Wednesday, 02 May 2018, 04:22 AM

Mine was a Hustler as first bike

VladTepes · Wednesday, 02 May 2018, 09:30 AM

Total rebuild? Well there is PLENTY of good info here mate that'll be helpful to you, check out the "Downloads" section and the pinned posts in the relevant technical forums.

And of course, ask questions. You'd be amazed at the ~~rubbish~~ knowledge in some people's noggins around here !

Kiwifruit · Wednesday, 02 May 2018, 11:15 AM

Hi T250. Good luck with the rebuild

Mick_J · Wednesday, 02 May 2018, 07:49 PM

Welcome to the forum T250, where are you?

Blubber · Wednesday, 02 May 2018, 07:55 PM

welcome

good way to get to know your machine

lloydjames · Thursday, 03 May 2018, 02:18 AM

Welcome

News:

New member