Brake dragging

[Hooli]

If Mr Barmy is correct about pads then I say to you all...
Throw away your EBC HH and fit genuine Suzuki ones.

EBC are shite (not as shite as others) but they wear quick for only ok brakes, these cheapos are MUCH better and last a lot longer so I'll be sticking with them. https://www.wemoto.com/bikes/suzuki/gsx_1400_k2_k3/02-03/picture/pads_front_brenta_standard_gg_type

[T250]

Got it a bit better today, loosened the pinch bolts in the bottom yoke, spun the wheel to set the calipers, then tightened the pinch bolts on the LH leg, bounced the suspension up and down a few times, re-torqued the axle, tightened remaining pinch bolts, wheel spins a bit better, don't have any problem pushing it around. Will see about taking it for a test ride tomorrow, as there are obviously a load of things to settle down after this rebuild...