End cans

[ezza]

I'm the same looks to me as if the rear wheels leaning a bit to the left at the top

[DanGSX]

Twin cans in general don't look right to me 

Red

You're the first person i've known to say that. I specifically went out my way to find twins.

It's a muscle bike after all, might as well look chunky.

I think your bike would look even more stunning with another of those Cobra pipes on the other side 

[KoZi]

For me twin end cans are better that single one. It looks like a big strong bike  .Symetrical look can be done but it is necessary to use a few pads under bolts and little modificate a handles.
Dominator exhaust - those cans are form Poland and in my country there are diferent opinions about them so on Your place I would go to Delkevic, Blueflame or Beowulf 

[Red Biker]

Hi Dan,
For me it's just not the look I go for, I like to see sprocket and chain on the other side hence no hugger or chain guard and again 'to me' it's more esthetically balanced with a single. I previously had a blackbird and swore never again on the dual pipes. At the end of the day it's each to their own but the second pipe is just excess baggage and has no function so as I dont like it that suites me fine!
If I did have 2 x Cobra I'd lose the excitement when walking around the bike.

The 'retro' look to me means you have to see wheels and chain,tres sexy !


Cheers
Red

[DanGSX]

Red,

I can totally understand where you're coming from regarding seeing the sprocket/chain etc. Looks like you've got a Supersprox on there? I am a fan.

I was even going to switch up from my 600 hornet to the 900, just to get the twin tail pipes. I'm a sucker for them.

Differing opinions is what makes this place even more exciting. At least we share the same taste in colour! (or lack of!!) 

EDIT: Couple of slash cuts here: http://www.ebay.co.uk/itm/Suzuki-GSX-1400-2001-2004-Stainless-Shotgun-slashcut-Exhausts-/201919649516?hash=item2f035956ec:g:kncAAOSw-3FZENYe

No idea if any good or not, but I think they look awesome on that bike.

[Notty]

Red,

I can totally understand where you're coming from regarding seeing the sprocket/chain etc. Looks like you've got a Supersprox on there? I am a fan.

I was even going to switch up from my 600 hornet to the 900, just to get the twin tail pipes. I'm a sucker for them.

Differing opinions is what makes this place even more exciting. At least we share the same taste in colour! (or lack of!!) 

EDIT: Couple of slash cuts here: http://www.ebay.co.uk/itm/Suzuki-GSX-1400-2001-2004-Stainless-Shotgun-slashcut-Exhausts-/201919649516?hash=item2f035956ec:g:kncAAOSw-3FZENYe

No idea if any good or not, but I think they look awesome on that bike.

those are the ones in my watch list on Fleabay - I have a K5 so will just the right hand fit ok? 

[gsxbarmy]

Red,

I can totally understand where you're coming from regarding seeing the sprocket/chain etc. Looks like you've got a Supersprox on there? I am a fan.

I was even going to switch up from my 600 hornet to the 900, just to get the twin tail pipes. I'm a sucker for them.

Differing opinions is what makes this place even more exciting. At least we share the same taste in colour! (or lack of!!) 

EDIT: Couple of slash cuts here: http://www.ebay.co.uk/itm/Suzuki-GSX-1400-2001-2004-Stainless-Shotgun-slashcut-Exhausts-/201919649516?hash=item2f035956ec:g:kncAAOSw-3FZENYe

No idea if any good or not, but I think they look awesome on that bike.

those are the ones in my watch list on Fleabay - I have a K5 so will just the right hand fit ok? 

No. The angle of the exit port from a single exit collector compared to that from a dual exit collector is different Notty, sorry.

[Red Biker]

Red,

I can totally understand where you're coming from regarding seeing the sprocket/chain etc. Looks like you've got a Supersprox on there? I am a fan.

I was even going to switch up from my 600 hornet to the 900, just to get the twin tail pipes. I'm a sucker for them.

Differing opinions is what makes this place even more exciting. At least we share the same taste in colour! (or lack of!!) 

EDIT: Couple of slash cuts here: http://www.ebay.co.uk/itm/Suzuki-GSX-1400-2001-2004-Stainless-Shotgun-slashcut-Exhausts-/201919649516?hash=item2f035956ec:g:kncAAOSw-3FZENYe

No idea if any good or not, but I think they look awesome on that bike.

Hi Dan,
The beauty is there is lots of options for all tastes 👍
I like the pipes, when I was searching for mine I did come across some that looked very similar to the Cobra in stainless only £120 but no Euro mark from China of course 😩

[KoZi]

Slash cuts    amazing sound and look from behind ! But side view is for me poor 
But when I was changing my cans i think about Delkevic or Slash cuts - Delkevic wins 

[Alz]

No twins for me, I have a 4-2-1 with an Akrapovic stubby end can.

[HLAH]

I shopped around for an aftermarket can for a while, would have liked a youshi but unfortunately wasn't born a blue blood, got this out of australia, customer service was good & a reasonable price....happy

[Kiwifruit]

Looks good. 

[Red Biker]

Like it Hlah 

re your link pipe, a cheap easy repair would be to spray it Black!
wouldn't look out of place  But there again i do like a lot of Black!

[gsxbarmy]

I shopped around for an aftermarket can for a while, would have liked a youshi but unfortunately wasn't born a blue blood, got this out of australia, customer service was good & a reasonable price....happy

Looks good, but would look better if you had the bolt for the clamp going to the end can underneath rather than on top 

[Tony Nitrous]

I have Stainless "Staintunes" on my B-King, they were a gift.
Unusual for me.

My current Busa, my last Busa, my project "bits a-Busa", my Bandit 12 and my GSX1400 all have Yoshimura cans or full systems. I can see at least 6 Yoshi cans sat here!


I may have a slightly biased opinion in this thread.