Brake pad pins

[northern]

Brake pad pins on my 14 are corroded. Want to replace them.
Rear OEM pin dimensions is M10x1 with pin itself 5.8mm*48mm.

Searching internet, I find pins which are 6mm in diameter... Do you think 0.2mm is a big difference? Does anyone have experience?

btw - what are front caliper pin dimensions?

[froudy]

I've got Pro Bolt titanium pins fitted to front and rear calipers on mine.

https://www.pro-bolt.com/titanium/ti-motorcycle-special-parts/titanium-caliper-pad-pins.html

[V_i_c_i]

Try fit second end of drill 6mm in diameter as caliber and you will see if 6mm is OK or if you need 5,8mm

[Mick_J]

Or you could just use a fine adjusting tool no1 

[northern]

Try fit second end of drill 6mm in diameter as caliber and you will see if 6mm is OK or if you need 5,8mm

Good point! How I did not came to this by myself 

[northern]

Or you could just use a fine adjusting tool no1 

This one? 

[Mick_J]

Or you could just use a fine adjusting tool no1 

This one? 

That's the one, although I think that looks like a No2. 

[V_i_c_i]

Try fit second end of drill 6mm in diameter as caliber and you will see if 6mm is OK or if you need 5,8mm

Good point! How I did not came to this by myself