Abba skylift fitting kit

[Leyther]

Does anyone know the fitting kit adapters code for the Abba stands, i have a dozen or more fitting kits but not sure of the code that is used for the GSX, its stamped on the bottom of  the adapter if anyone can help?

[Gsxjohn]

Hi Leyther, Ive just got a kit for my 03. If you look on the Abba site its there. Fitting Kit [78]
Suzuki GSX 1400 (up to 06) (2003)
On the bases are;
ABBA 047 & ABBA 042
Hope this helps.👍

[Leyther]

Hi Leyther, Ive just got a kit for my 03. If you look on the Abba site its there. Fitting Kit [78]
Suzuki GSX 1400 (up to 06) (2003)
On the bases are;
ABBA 047 & ABBA 042
Hope this helps.👍

Great - thanks for this, i was going to call them as i couldnt find it on the website, much appreciated.

[Leyther]

Hi Leyther, Ive just got a kit for my 03. If you look on the Abba site its there. Fitting Kit [78]
Suzuki GSX 1400 (up to 06) (2003)
On the bases are;
ABBA 047 & ABBA 042
Hope this helps.👍

Great - thanks for this, i was going to call them as i couldnt find it on the website, much appreciated.

Update - on the base for a K7 model it is stamped  54. Checked with ABBA stands as my bike is a K7

[seth]

Hi Leyther, Ive just got a kit for my 03. If you look on the Abba site its there. Fitting Kit [78]
Suzuki GSX 1400 (up to 06) (2003)
On the bases are;
ABBA 047 & ABBA 042
Hope this helps.👍

Great - thanks for this, i was going to call them as i couldnt find it on the website, much appreciated.

Update - on the base for a K7 model it is stamped  54. Checked with ABBA stands as my bike is a K7

The frames didn't change over the years so if it fits 1year it'll fit them all

[Hooli]

Out of interest, I just checked the part number for K2 & K7 swing arm pivots. It's the same & as the Abba lift plugs into that then Seth is definitely right.

[Leyther]

Out of interest, I just checked the part number for K2 & K7 swing arm pivots. It's the same & as the Abba lift plugs into that then Seth is definitely right.

Wonder why they have two versions on the website, can only think the design of the stand may have changed, as Seth and yourself mention, the bikes swingarm axle is unchanged over the years. I will have time to test my current adapter kit tomorrow and will update.

[Hooli]

Aye it's a bit of a mystery. My best guess is the the early one holds the bike further from the upright to allow for the LH pipe the later bikes don't have, or similar for the longer foot pedal on the early side stands.

[seth]

That's a great and probably the only reason hooli as the frames (except the headstock due to different bearings) are all the same .

[Leyther]

Fitting adapter 54 has my K7 off the floor, time to start a few jobs so new tyres today, forks out ready for oil and tidy up, and general tidy and lube before lowering it back on its wheels, cant wait for a dry day to re establish myself with the feeling of the bike.......................Its been a while since the last one.