PC III map needed for rs232 model

[adamwo]

Hello, could anybody send me map for Pc iii rs232 , for gsx 1400. I can't read my. Computer see powercommander, the current rpm , throttle is showing, but map is empty, i put some in pc iii 14 years ago. I will bulid my new map, by copying from pc iii usb. My mail is adamgsx@gmail.com.

[gsxbarmy]

Good afternoon @adamwo - when you get time, an introduction of you and your machine would be appreciated, thanks

https://gsx1400owners.org/forum/index.php?board=20.0

I have a custom dyno USB PCIII map from my K7 I'm happy to mail you if that helps, was done when bike was standard except for 4 into 2 system and pairs being removed. Let me know.

[Hooli]

Ayup, as Barmy says an intro in the intro area is appreciated by the inmates here.

As as maps goes, RS232 is the early serial port PCIII so the USB PCIII maps don't work because the serial PCIII maps every 500rpm & the USB one every 250rpm.

Here's a link to the complete software/maps/etc on the CD that came with my serial PCIII way back in 2002 when the previous owner got it https://drive.google.com/drive/folders/1TRcNfGeUfReuG_W7VZbpK1eqeuA0PQbU?usp=sharing

[adamwo]

Thank You gsxbarmy, but the USB maps do not want to work with the RS232 version

Good afternoon @adamwo - when you get time, an introduction of you and your machine would be appreciated, thanks

https://gsx1400owners.org/forum/index.php?board=20.0

I have a custom dyno USB PCIII map from my K7 I'm happy to mail you if that helps, was done when bike was standard except for 4 into 2 system and pairs being removed. Let me know.

[adamwo]

Thank You Hooli, this is excatly what im looking
I have old map, but my GSX is to rich, my friend riding behind me, tell me that they smell fuel.
My GSX has PC III, Yoshi cams and full Akrapovic exhaust. I will get AFR sensor from my friend, and i want to make my own map.

Ayup, as Barmy says an intro in the intro area is appreciated by the inmates here.

As as maps goes, RS232 is the early serial port PCIII so the USB PCIII maps don't work because the serial PCIII maps every 500rpm & the USB one every 250rpm.

Here's a link to the complete software/maps/etc on the CD that came with my serial PCIII way back in 2002 when the previous owner got it https://drive.google.com/drive/folders/1TRcNfGeUfReuG_W7VZbpK1eqeuA0PQbU?usp=sharing