Dealer Mode Switch

[froudy]

Will this fit the later models?
I think it will, but just wanted to check first.

Thanks for any input

http://www.ebay.co.uk/itm/260985486802?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[VladTepes]

Paper clip is cheaper

[froudy]

Yes I though that too Vlad.
Mrs F was struggling to think of things for my birthday present and this has been in my ebay watch list for ages..Along with a few other bits and pieces.

So, will it fit?

[V_i_c_i]

No, later model have another connector type. You have to find right one. Or buy conector for 5 bucks and do it yourself 

[V_i_c_i]

This is for K5+ models...
http://m.ebay.co.uk/itm/WATERPROOF-Dealer-mode-tool-switch-Suzuki-GSX-1400-2004-2007-/251023356434?hash=item3a72287212%3Ag%3AaQgAAOSwgNRV7q4l&_trkparms=pageci%253Ab66df8c4-fb4e-11e6-abaf-74dbd1809b91%257Cparentrq%253A750f3acf15a0a5eb3611da90ffecbaba%257Ciid%253A1

[froudy]

This is for K5+ models...
http://m.ebay.co.uk/itm/WATERPROOF-Dealer-mode-tool-switch-Suzuki-GSX-1400-2004-2007-/251023356434?hash=item3a72287212%3Ag%3AaQgAAOSwgNRV7q4l&_trkparms=pageci%253Ab66df8c4-fb4e-11e6-abaf-74dbd1809b91%257Cparentrq%253A750f3acf15a0a5eb3611da90ffecbaba%257Ciid%253A1

Thanks..Don't know how I missed that one

[Celtic32]

That's the one u have on my K6. Works a treat. Wired it up to where the helmet lock is...well was.

[gsxbarmy]

Will this fit the later models?
I think it will, but just wanted to check first.

Thanks for any input

http://www.ebay.co.uk/itm/260985486802?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

No that's for the earlier models - there is another one they do for the later (K5 ->) models Steve

[froudy]

Thanks Dave..Sorted now

[froudy]

I actually got to test my new switch today.

Out for my first ride since the rebuild and my operation back in Jan...Good to be back on two wheels especially as it's been a nice warm sunny day here

Bike rode fine. Stopped for a 10 minute break..Rode off and noticed a "RED" warning light on.
Panicked thinking it was oil warning and stopped straight away. Ignition off, restart and then realised it was F1 light and fault had cleared
Stopped again later on and when I restarted the F1 light was on again. Left the engine running and operated the switch...
Code C31..Gear Position signal/GP Switch.

When I got home I pulled the wiring, tested and plugged it all back in..Seems to be ok now!

[seth]

great you got out on the bike
teething troubles but minor one so glad its sorted

[froudy]

Cheers Seth...
It was so good to get back on two wheels again after so long!