Clocks buttons not working

[sam61]

To add to my misery on this bike I put a oximiser lead on and tried to set time but neither select or reset buttons are working. Can see mileage and time on display but that's it.
Any ideas w he at this is?

[Dwain Dibley]

You have to press both at the same time to enter settings, unless you have already done this.

D.D.

[Hooli]

What can happen is the pin behind the buttons can get dislodged. If you take the covers off the clocks you'll see what I mean when you take the front off.
It's nothing difficult, just don't overtighten the screws as they are into plastic.

Oh & do it somewhere warm & dry, that way you trap dry air inside the clocks when you seal them back up & won't suffer the clocks misting up.

[sam61]

What can happen is the pin behind the buttons can get dislodged. If you take the covers off the clocks you'll see what I mean when you take the front off.
It's nothing difficult, just don't overtighten the screws as they are into plastic.

Oh & do it somewhere warm & dry, that way you trap dry air inside the clocks when you seal them back up & won't suffer the clocks misting up.

Thank you will try that