Fuel cut off valve

[Speedy1959]

Hi All,

I dont know if it will be of interest on here but here goes...

On my previous Honda CB1300 they were VERY stingy with the length of fuel hose that connected the tank to the injector rail..
It made tank removal EXTREMELY difficult.. If the fuel hose was 2 or 3" longer it would have made all the difference..
The problem was that they had specialized hose fittings at either end so what I did was to install a 1 way fuel cut off valve anto the original hose.
I had to be VERY careful as to where i cut the hose for the installation, otherwise it would interfere with the gubbins under the tank.
I bought a used hose off eBay so I could experiment..

In the end it worked amazingly well and made tank removal almost fun!

Have alook...
Expensive but super well made and more to point suitable for high pressure fuel injection systems..

https://www.ebay.co.uk/itm/123470486940#rwid

S.