Carbon Rear Hugger

[J16SDA]

Morning all,

I managed to get myself a free carbon effect hugger,  its abit faded yellow in places so before I install it I wanted to either paint it or get it relaqured if that's a thing? I'm not up on my Bodyshop knowledge so unsure what is achievable. Please see attached.

Thanks

[Del]

you sure that is carbon fibre effect look awfully like real carbon from here

to re clearcoat it you need to flatten it with 800 grit wet & dry paper and once smooth wipe with panel wipe and then apply the clear coat (lacquer) - if using rattle cans then take your time building up coats but this may leave it slightly dull so you will need to polish it with compound or spend a while t cutting it to get the sheen back

best finish would be to get some one with painting equipment to clear coat it - this way you will get a really good deep finish

Hope this helps fella

[VladTepes]

read this post it may help
https://gsx1400owners.org/forum/index.php?topic=5635.msg79235#msg79235