Rear shock bolt sizes

[Notty]

what are the Rear shock nut and bolt sizes as I have secured funding and will be ordering my Hagon Nitro's and thought change to stainless steel  ? Did try a search honest! 

[Speedy1959]

Notty..
The lower bolt is M10 x 45mm
Not sure about the upper bolt.

S.

[Basil Brush]

Pop to your nearest bolt factors. Place on counter - jobs a good 'un.

[Notty]

Pop to your nearest bolt factors. Place on counter - jobs a good 'un.

Sounds like a good idea - trouble is I only use ProBolt and its an hours drive away 

[Mick_J]

Is'nt the top one welded to the frame?

[grog]

high tensile needed mate. dont use stainless in stressed areas. have a search on that.

[Notty]

high tensile needed mate. dont use stainless in stressed areas. have a search on that.
[/quote
Will these be ok? Titanium Hex Head M10 x (1.25mm) x 45mmThese bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. ? 

[Basil Brush]

I never knew that. I just took 'em off. Popped to the local bolt factors. and asked for like for like in nice stainless. 

[kquacker]

Anyone know the rear shock upper bolt size please ?