rear guard cut off

[Mrg]

Yes did mine last year loads better , and looks well tidy 

[saggy0000]

stop cutting rear mudguards down,swap for mine

[Notty]

Looks great - guess I will have to have a go at mine - good news is I have a tail tidy I bought ten years ago if my skills aren't up to Grog's 

Finally used my  skills learnt in skool and went for it - pleased with the look but can now see that my hugger is lopsided !! 

[saggy0000]

STOP IT, WHY CHOP WHEN YOU CAN HAVE MINE??? I WILL COME AND REMOVE,AND REFIT MINE PLEASE GUYS  JUST STOP THE MASACRE

[gsxbarmy]

STOP IT, WHY CHOP WHEN YOU CAN HAVE MINE??? I WILL COME AND REMOVE,AND REFIT MINE PLEASE GUYS  JUST STOP THE MASACRE

What's with all the angry angry and furious furious icons? People don't HAVE to do a swap with you

There are a number of times we have suggested that you post pictures of yours up and contact others who have previously said about cutting theirs down. Clearly you haven't done this. Also you need to state whether yours comes with or without the metal plate where the rectifer fits (that you can't buy anymore) that is riveted on.

If it was me, I would not want to swap without seeing how good bad or otherwise yours may have been cut, as they can be cut in lots of different ways. I would also want to see the condition. I may not want to swap then anyway, as its up to the individual who owns the machine.

So if you REALLY want to do a swap Saggy, then put a picture in the Wanted section AS WE HAVE SUGGESTED A NUMBER OF TIMES BUT WHICH YOU HAVE TAKEN NO NOTICE OF 

But also respect people who don't want to do a swap either please.

Thank you

[Notty]

STOP IT, WHY CHOP WHEN YOU CAN HAVE MINE??? I WILL COME AND REMOVE,AND REFIT MINE PLEASE GUYS  JUST STOP THE MASACRE

What's with all the angry angry and furious furious icons? People don't HAVE to do a swap with you

There are a number of times we have suggested that you post pictures of yours up and contact others who have previously said about cutting theirs down. Clearly you haven't done this. Also you need to state whether yours comes with or without the metal plate where the rectifer fits (that you can't buy anymore) that is riveted on.

If it was me, I would not want to swap without seeing how good bad or otherwise yours may have been cut, as they can be cut in lots of different ways. I would also want to see the condition. I may not want to swap then anyway, as its up to the individual who owns the machine.

So if you REALLY want to do a swap Saggy, then put a picture in the Wanted section AS WE HAVE SUGGESTED A NUMBER OF TIMES BUT WHICH YOU HAVE TAKEN NO NOTICE OF 

But also respect people who don't want to do a swap either please.

Thank you

cheers Dave those were my thoughts - and anyway I have only removed 6 inches - and Wigan a long drive with no pics on site - sorry Saggy