Headlight rear bowl

[Stepdoug]

Ok. Picked bike up today
Right question time.
Bike had twin headlights on when previous owner bought it.
So he has changed it to a single headlight.
But all the wires are now behind the outside of the bowl
Obviously this was done when the twins were fitted.
How big a hole do I need to drill to get the wires through with the blocks on.
Can anyone measure theirs
I have a feeling that it's an oval-ish hole
And what could I use to stop the wires rubbing through on the edge

Cheers

[Notty]

Ok. Picked bike up today
Right question time.
Bike had twin headlights on when previous owner bought it.
So he has changed it to a single headlight.
But all the wires are now behind the outside of the bowl
Obviously this was done when the twins were fitted.
How big a hole do I need to drill to get the wires through with the blocks on.
Can anyone measure theirs
I have a feeling that it's an oval-ish hole
And what could I use to stop the wires rubbing through on the edge

Cheers

one on eBay for £39
https://www.ebay.co.uk/itm/144384992344?hash=item219e042458:g:e~MAAOSwW4Zh8AD2&amdata=enc%3AAQAHAAAAoHQ2oIqLKwORxN0Sf5LDY%2B8i7hF5r2qrU7wsXt2eD%2F03Z0zDGYgf%2BXHZQ83HLTGRy6DZixfu69XiFOGv5LRT8fGteM0B3Di5x7%2FTOVkyDuTKX9AMGY4z%2FPQlS2sWcXFgg2d7W3%2BbYXdHPkJUYabOIOJl1M0yPwH9UwySdrqMauaRdqTHs%2FjGz%2Fr2GofZaDSrgfGtPfw%2FB8vfDYy4yJ6I4c4%3D%7Ctkp%3ABk9SR4zivo7cYA

[seth]

How long does it need to be in the back of the shed before it's for sale 

[GSXKING]

Now now @seth @Notty has cleared all his loot from @froudy s place 

[froudy]

This might help you with wire routing in the bowl @Stepdoug

[Stepdoug]

Cheers. Thought it was an oval hole.
Not sure now whether to just tape the wires up better and leave them behind the bowl. .
As they would be there if it still had the twins set on it. .
Got a few bits to change on it . So need to go play in man cave