Clutch installation instructions wanted!

[Athelstanexxx]

Hi folks
My bike is fine, and all is working smooth. Gearbox is sometimes clunky when operated with clutch lever (I do it 98% of the time riding with calm and ease).
When gearing up, no clutch, gearbox is perfect
For this reason, and being a quite old lady, I would like to change the clutch components
It's hard to find a complete instruction guide on how installing a new clutch.
Anyone suggesting me the link of an existing guide or a complete instruction set?

Thank you very much
Athel

[grog]

Just ask Pip, he just did it.

[Mick_J]

Beat me to it grog, bugger.

https://gsx1400owners.org/forum/index.php?topic=6954.msg92251;topicseen#new

[Hooli]

Why? the clutches on these don't wear out. Just rebuild the slave cylinder & clean the pushrod.

[Athelstanexxx]

Not able myself unfortunately
Will go for a mechanic
Thanks you all folks

[Athelstanexxx]

Hi Hooli
Would gladly do that: any step by step instructions?
Thank you very much

[Hooli]

TBH it's as simple as take the slave carrier off, unscrew the cover over the cylinder, pump the piston out with the lever.

Then clean it all up & put it back.

[Athelstanexxx]

Will do that on end season together with a couple of other maintenance I scheduled for end summer before having the beast to bed for winter
thank you very much
Athel

[Pipbiker]

I've also added my notes for clutch inspection/change here, if you need it:

https://gsx1400owners.org/forum/index.php?topic=6954.msg92251;topicseen#new

My 1400 is nearly 50k miles and none of the measurements were remotely near the end of their tolerances.