GSX1400 Owners .org

Technically Speaking => Accessories & Tools => Topic started by: Horse on Sunday, 27 April 2025, 04:20 PM

Title: Workshop non negotiables
Post by: Horse on Sunday, 27 April 2025, 04:20 PM
In the interests of finding products that make life easy thought I would ask what consumables people swear by , I will start with these 4 that reliably perform above and beyond and in my opinion are far superior to similar products.

INOX lubricant/penetrant that doesn't dry out and harmless to nearly everything

CARBON CONDUCTIVE GREASE great for electrical contacts protects from corrosion and lowers resistance

3452 SYNTHETIC GREASE High/low temp grease that is chemically resistant to lots of substances

LOCTITE 567 hydraulic sealant good for all hydrocarbon sealing duties as well as other liquids I use it on sump plug washers instead of replacing them it then also serves as a slight resistance to the plug backing out

 Chime in if you have products others might not know about , i realise some of these might not be available internationally

Regards,


 

Title: Re: Workshop non negotiables
Post by: grog on Sunday, 27 April 2025, 05:08 PM
Agree loctite &inox. Lanox also. NeverSeize, VMX gear oil-for my chain. Micro fibre cloths, SolvolAutosol, brake&carby cleaner. Synnex3000 oil,use in cars, bike, mower& whipper snipper.Im sure i have other must haves but thats a start.
Title: Re: Workshop non negotiables
Post by: froudy on Sunday, 27 April 2025, 05:31 PM
Nickelslip anti seize grease. Messy, but stops bolts seizing up, especially header bolts as it's more heat resistant than Coppaslip.