GSX1400 Owners .org
Technically Speaking => Brakes => Topic started by: Mick_J on Thursday, 11 May 2023, 07:42 PM
I fitted a new pair of EBC X disks a couple of years ago, after only 3 months they had gone rusty and looked shagged so I complained and had them replaced. Last MOT the mechanic told me my disks were on their way out as there was slight pulsing at the bars, I was a bit surprised as they are less than two years old. However I went up to my Mums last weekend and coming down a long steep hill I had to apply the breaks quite hard and there was no pulsing but a proper Judder.
I will not fit EBC disks again so what other disks are people using or can recommend?
Metalgear is the GO down here
Years ago I got 'Zone' discs off ebay as they were the cheapest. They were crap with the pads I had (can't recall what) but work great with the el-cheapo organics I run now.
So far so good with these. Made in USA.
https://www.ebay.co.uk/itm/284395334324?fits=UKM_CCM%3A1400%7CUKM_Make%3ASuzuki%7CUKM_Model%3AGSX&hash=item4237486ab4:g:HzUAAOSw-pthDVnL&amdata=enc%3AAQAIAAAA0C5%2FprXmUuuMwmM2ZBPDQBSzmUPAgyUL71Gh88HMtYJzxskg%2F6takpmiovfs2vPviVquhXh%2B5OGE4519qbka68e0qSD0VxGVY1%2BaM7dkRmFacBQQ6lp2dTZ7KbG1zyUfnlj1v0rAWq1Y4yYTcQFZVn2gxlN%2Fc%2BlpODQH0x%2FleRCbnHP%2F8KQn3QGoHPQqocPUn83nr7E%2BoFTRiDu8D%2BPNI4oyk5cItd8cA07dixxxKX0GdtDKN55aSOQiEfnjrcJoq44e49pPAL1d%2B%2BnnWXRFKM0%3D%7Ctkp%3ABk9SR-TMs7CBYg