GSX1400 Owners .org

To add to my misery on this bike I put a oximiser lead on and tried to set time but neither select or reset buttons are working. Can see mileage and time on display but that's it.
Any ideas w he at this is?

You have to press both at the same time to enter settings, unless you have already done this.

D.D.

What can happen is the pin behind the buttons can get dislodged. If you take the covers off the clocks you'll see what I mean when you take the front off.
It's nothing difficult, just don't overtighten the screws as they are into plastic.

Oh & do it somewhere warm & dry, that way you trap dry air inside the clocks when you seal them back up & won't suffer the clocks misting up.

Quote from: Hooli on Monday, 03 April  2023, 10:14 PMWhat can happen is the pin behind the buttons can get dislodged. If you take the covers off the clocks you'll see what I mean when you take the front off.
It's nothing difficult, just don't overtighten the screws as they are into plastic.

Oh & do it somewhere warm & dry, that way you trap dry air inside the clocks when you seal them back up & won't suffer the clocks misting up.

Thank you will try that