GSX1400 Owners .org

General => Member's Bikes => Topic started by: sam61 on Sunday, 02 April 2023, 10:57 PM

Title: My K3 work in progress
Post by: sam61 on Sunday, 02 April 2023, 10:57 PM
20230402_122058.jpg20230402_122247.jpg 
Title: Re: My K3 work in progress
Post by: T250 on Sunday, 02 April 2023, 11:03 PM
Sam, that's a K2 paint scheme...
Title: Re: My K3 work in progress
Post by: sam61 on Sunday, 02 April 2023, 11:10 PM
Quote from: T250 on Sunday, 02 April  2023, 11:03 PMSam, that's a K2 paint scheme...

I know it is . 03 plate Its a cat N in 2017 so could be a new tank but as its scrapped where it was dropped it could be a leftover 2002 maybe?  :clapping:
Title: Re: My K3 work in progress
Post by: Hooli on Monday, 03 April 2023, 10:09 PM
Aye looks K3 to me, with the wrong tank.

Matt side panels, K2 had gloss.
No cut out on the slivery covers on the end of the fuel rail, those will be plastic. K2 were monkey metal & had a semi-circular cut out for the end of the fuel rail.
Bet you've got a hazard light switch, not a light switch too.

/Anorak off
Title: Re: My K3 work in progress
Post by: Dwain Dibley on Tuesday, 04 April 2023, 12:04 AM
Anorak off ???  Or just unzipped slightly.   :coffeescreen:

D.D.
Title: Re: My K3 work in progress
Post by: Hooli on Tuesday, 04 April 2023, 02:05 AM
I didn't even mention the K2 had ball bearings for the steering stem & K3 onwards have roller bearings either. Although you can retrofit the rollers that last a lot longer to a K2.
Title: Re: My K3 work in progress
Post by: sam61 on Tuesday, 04 April 2023, 03:37 AM
You forgot the colour of the grabrail should be white?
Title: Re: My K3 work in progress
Post by: Hooli on Tuesday, 04 April 2023, 05:21 AM
Meh, people can paint bits the wrong colour on any year of bike  :stir:
Title: Re: My K3 work in progress
Post by: gsxbarmy on Tuesday, 04 April 2023, 07:44 AM
Also rear hangers were polished as standard on the K2's, they got the matt aluminium K3 onwards.

It should be noted though that the K2/K3 switch over was a little hazy as the changes they made were effected according to what was in the parts bin - so at the point of swap over there were a few months where some K2's had what we see as K3 parts fitted, purely because the supply of those K2 parts - possibly the side panels and rear hangers  for the K2 - had all been utilised, so they fitted K3 parts instead. And in fact some very early K3's did have K2 tanks fitted.

I suppose the deciding factor will be whether there is a hazard light switch on the RH switch gear. If so its K3, if not its a K2 (as the hazard light switch was fitted as standard to all K3's)

Title: Re: My K3 work in progress
Post by: sam61 on Tuesday, 04 April 2023, 02:52 PM
Good description . Yep got a hazard switch k2 or k3 lets just hope it is parts bin and not fit for the bin then . Not got the parts yet so will have to give it a couple more days to get them. I will call my mechanic and book it in also get a small mortgage ready to pay for it  :whatever:  :cry2:
Title: Re: My K3 work in progress
Post by: sam61 on Tuesday, 04 April 2023, 09:44 PM
Ok guys decided to give bike to my mechanic to sort out as i cba with getting hands dirty anymore( just means wife has to do one extra shift to pay for it  :rofl2: )
All parts on the way so hopefully be back on the road next week. Woohoo
Mind you it did ride well when taking it there felt better than the bandit and as comfy as the vstrom no pings or pangs so hopefully be good to go.
Roll on  :boogie:
Title: Re: My K3 work in progress
Post by: grog on Wednesday, 05 April 2023, 05:14 PM
 :cruisin: Only one person needs to be happy with it.
Title: Re: My K3 work in progress
Post by: Dwain Dibley on Wednesday, 05 April 2023, 08:47 PM
Can't  wait to see it when it comes back.

D.D.
Title: Re: My K3 work in progress
Post by: sam61 on Friday, 07 April 2023, 04:10 AM
Popped in to see my mechhanic today and thought i would check rear shock adjusters cant turn dials on right side so thats an9tyer 360 squid on hew ones  :clapping:  :clapping:  :boogie2:  :frustrated:  :frustrated:
Title: Re: My K3 work in progress
Post by: Dwain Dibley on Friday, 07 April 2023, 06:19 AM
This could save you money my old potato.

D.D.

Title: Re: My K3 work in progress
Post by: Eric GSX1400K3 on Friday, 07 April 2023, 09:33 AM
@sam61 you mean the rear preload adjuster right? Easy fix. These shocks are serviceable.  All you need is a set of spring compressors and basic hand tools. No need to release gas and oil etc if only rebuilding the preload adjuster. They get full of road grime, just need a clean out and repacking with new grease, but you need to remove the spring to disassemble them.  As DD says, will save you some coin.
Title: Re: My K3 work in progress
Post by: sam61 on Friday, 07 April 2023, 01:58 PM
Quote from: Dwain Dibley on Friday, 07 April  2023, 06:19 AMThis could save you money my old potato.

D.D.


Cheers Dwain that is a great video . Didnt realise how simple it is . I ll order the parts now then while its in the shop
Title: Re: My K3 work in progress
Post by: sam61 on Friday, 07 April 2023, 04:18 PM
You know something guys everytime i look at the bike and my bank account im ready to give up but soon as i read some of the comments i get inspired . Some of you know your stuff or is it ive forgotten how to ? Either way thanks should be back on the road in couple weeks time
Title: Re: My K3 work in progress
Post by: sam61 on Wednesday, 12 April 2023, 06:53 PM
All parts in and starting on it today. Hopefully have it for the weekend
Title: Re: My K3 work in progress
Post by: grog on Wednesday, 12 April 2023, 07:08 PM
Sam, just keep at it. I dont pretend to know much but in 11 yrs, this Org and old one have helped me lots on knowing my bike. Some very clever people. Ive put a lot of advice into action, reckon my 14 would ride as good as anyones, i find it an amazing motorcycle and ive had a few. Takes a while but worth it.
Title: Re: My K3 work in progress
Post by: Eric GSX1400K3 on Wednesday, 12 April 2023, 07:19 PM
You'll be right, Sam61, have a go, and be safe in the knowledge that the collective wisdom on here will help you out (or at least you will provide some discussion points). This place is a great source of info and knowledge.
Title: Re: My K3 work in progress
Post by: sam61 on Wednesday, 12 April 2023, 09:06 PM
Quote from: Eric GSX1400K3 on Wednesday, 12 April  2023, 07:19 PMYou'll be right, Sam61, have a go, and be safe in the knowledge that the collective wisdom on here will help you out (or at least you will provide some discussion points). This place is a great source of info and knowledge.
You're right there with the wisdom  thingy  I've never known so many knowledgeable bikers in one group unlike all the bandit ones I'm in this place is a god send. Roll on the weekend when it's all ready(maybe)  :cry2:
Title: Re: My K3 work in progress
Post by: Hooli on Wednesday, 12 April 2023, 09:22 PM
Is it finished yet?
Title: Re: My K3 work in progress
Post by: sam61 on Thursday, 13 April 2023, 03:19 AM
Quote from: Hooli on Wednesday, 12 April  2023, 09:22 PMIs it finished yet?
Nooò  :cry2:
Title: Re: My K3 work in progress
Post by: sam61 on Friday, 14 April 2023, 02:44 PM
Its done :boogie: picked it up last night and its up and running like a goodun.  mechanic didnt charge me the earth for it which makes it even better. :boogie2:
Title: Re: My K3 work in progress
Post by: grog on Friday, 14 April 2023, 06:59 PM
On and on now. They love to be ridden.
Title: Re: My K3 work in progress
Post by: Dwain Dibley on Friday, 14 April 2023, 09:10 PM
Good Man, get it out there now, and get some miles on.

Pics please.

D.D.
Title: Re: My K3 work in progress
Post by: sam61 on Saturday, 15 April 2023, 05:46 AM
Much happier now. Putting my mra touring screen and top box on tomorrow then long rideout with the vjmc on sunday

20230414_131425_copy_1382x1843.jpg

20230414_051439_copy_1382x1843.jpg

20230414_051423_copy_1382x1843_1.jpg

20230414_051702_copy_1843x1382.jpg   
Title: Re: My K3 work in progress
Post by: sam61 on Sunday, 16 April 2023, 03:09 PM
Mra screen and rack fitted. Filled it up 35 quid ouch but hopefully get a good return on that.Took it for a quick spin yesterday and felt pretty good. Off on a couple hundred mile trip with the vjmc today that Will put it to the test.:hat:
Title: Re: My K3 work in progress
Post by: grog on Sunday, 16 April 2023, 05:07 PM
Your fuel bloody expensive. Just worked out 22 litre refill 21 pounds.
Title: Re: My K3 work in progress
Post by: Rynglieder on Sunday, 16 April 2023, 08:27 PM
Quote from: grog on Sunday, 16 April  2023, 05:07 PMYour fuel bloody expensive. Just worked out 22 litre refill 21 pounds.

Yes, regularly grazing thirty quid before you get off the forecourt these days. It is coming down slightly but there are big regional differences even in the UK.

Recently I got diesel for 15p per litre less in Devon than I was being charged in the West Midlands - some retailers are taking advantage.

(The diesel did not go in the bike BTW  :grin: )
Title: Re: My K3 work in progress
Post by: Mick_J on Sunday, 16 April 2023, 11:04 PM
Some places in South Wales are 10p cheaper than around Bristol, someone is definitely taking the piss.
Title: Re: My K3 work in progress
Post by: KiwiCol on Monday, 17 April 2023, 05:28 AM
Just to add a Kiwi perspective to this, I had to go back over the hill last week to Christchurch, took the Merc.  Diesel here in Westport was $2.54 per Litre before I left, I didn't get any as I had enough to get over there. In Chc the next day, filled up, $1.71 per Litre   That's a difference of 83c / L!    :furious:   and they say buy local, yeah right, then why you ripping us off so much?
Title: Re: My K3 work in progress
Post by: sam61 on Monday, 17 April 2023, 05:40 AM
We have a waitrose in town dont you know  wot wot.means they can charge more around here  :cry2:
Done a good 140 mile round trip today finished on two bars so not bad for a first run and it went like a goodun so smooth and comfy. Suffolk classic bike show was Crap  though
Organised chaos at its best

20230416_095808_copy_1382x1843.jpg


so left and went to krazy horse for lunch.

20230416_095714_copy_1382x1843.jpg
Title: Re: My K3 work in progress
Post by: GSXKING on Monday, 17 April 2023, 10:09 AM
It looks chilly Sam 😳😳🥶🥶
Title: Re: My K3 work in progress
Post by: sam61 on Monday, 17 April 2023, 02:46 PM
Quote from: GSXKING on Monday, 17 April  2023, 10:09 AMIt looks chilly Sam 😳😳🥶🥶

12°c is roasting hot in britain mate 😂🤣☀️🌞
Title: Re: My K3 work in progress
Post by: Tony Nitrous on Monday, 17 April 2023, 06:44 PM
Quote from: sam61 on Monday, 17 April  2023, 02:46 PM
Quote from: GSXKING on Monday, 17 April  2023, 10:09 AMIt looks chilly Sam 😳😳🥶🥶

12°c is roasting hot in britain mate 😂🤣☀️🌞

I had 40 years in the UK. The weather was one factor in getting out. I've seen 2 frosts in the last 19 years since I left.
It's mid Autumn here...

(https://i.ibb.co/HBYjcD1/ABDE03-B7-E0-D3-42-C0-95-BF-159-B5-C3-A8-E09.jpg) (https://imgbb.com/)
Title: Re: My K3 work in progress
Post by: sam61 on Tuesday, 18 April 2023, 03:35 PM
Quote from: Tony Nitrous on Monday, 17 April  2023, 06:44 PM
Quote from: sam61 on Monday, 17 April  2023, 02:46 PM
Quote from: GSXKING on Monday, 17 April  2023, 10:09 AMIt looks chilly Sam 😳😳🥶🥶

12°c is roasting hot in britain mate 😂🤣☀️🌞

I had 40 years in the UK. The weather was one factor in getting out. I've seen 2 frosts in the last 19 years since I left.
It's mid Autumn here...

(https://i.ibb.co/HBYjcD1/ABDE03-B7-E0-D3-42-C0-95-BF-159-B5-C3-A8-E09.jpg) (https://imgbb.com/)


Might join you soon. I cant handle this cold weather anymore.
Got half my family in gladstone park who have been pushing us for years to move there might take up that offer now  :cheers:
Title: Re: My K3 work in progress
Post by: Rynglieder on Wednesday, 19 April 2023, 04:49 AM
Quote from: Tony Nitrous on Monday, 17 April  2023, 06:44 PM
Quote from: sam61 on Monday, 17 April  2023, 02:46 PM
Quote from: GSXKING on Monday, 17 April  2023, 10:09 AMIt looks chilly Sam 😳😳🥶🥶

12°c is roasting hot in britain mate 😂🤣☀️🌞

I had 40 years in the UK. The weather was one factor in getting out. I've seen 2 frosts in the last 19 years since I left.
It's mid Autumn here...

(https://i.ibb.co/HBYjcD1/ABDE03-B7-E0-D3-42-C0-95-BF-159-B5-C3-A8-E09.jpg) (https://imgbb.com/)


I hope you are filling up the bird bath and leaving a dish on the floor for the little critters.
Title: Re: My K3 work in progress
Post by: Tony Nitrous on Wednesday, 19 April 2023, 07:24 AM
Quote from: Rynglieder on Wednesday, 19 April  2023, 04:49 AMI hope you are filling up the bird bath and leaving a dish on the floor for the little critters.

Not normally. Neighbours either side of me have dams and away from my house I have a spring / creek. We try not to encourage wildlife around the house, we get way to much as it is. Bird life here is wonderful, from Rosella's and Black Cockatoo's up to Wedgetail Eagles, but I try not to encourage the resident Magpies, Kookaburras etc around the house, every crap they take on my house or shed roofs gos straight into my drinking water!