Text only | Text with Images

GSX1400 Owners .org

Technically Speaking => Fuelling => Topic started by: Banditowner1200 on Saturday, 25 March 2023, 08:53 AM

Title: Fuel regulator o ring size?
Post by: Banditowner1200 on Saturday, 25 March 2023, 08:53 AM
Hi all.
I've looked on here for what I'm after, however can't find the measurements for the o ring size needed for the fuel regulator.
I gather all gsx fuel regs are all the same with the o ring size aswel?.
If anyone knows the size then the help is appreciated. Cheers.
Title: Re: Fuel regulator o ring size?
Post by: Mick_J on Saturday, 25 March 2023, 07:49 PM
Someone posted the info last week, think it was chappers.
Title: Re: Fuel regulator o ring size?
Post by: Eric GSX1400K3 on Saturday, 25 March 2023, 09:51 PM
Here you go.  I still haven't figured our how thr new photo upload works.

Just measured a spare I have.  OD is 14.6mm, ID 8.0mm and the o ring is 3.6mm thick.
Title: Re: Fuel regulator o ring size?
Post by: Dwain Dibley on Saturday, 25 March 2023, 11:37 PM
I think this is the post referred to above.

Here. (https://gsx1400owners.org/forum/index.php?topic=7364.msg97735#msg97735)

D.D.
Title: Re: Fuel regulator o ring size?
Post by: Banditowner1200 on Sunday, 26 March 2023, 01:41 AM
Quote from: Eric GSX1400K3 on Saturday, 25 March  2023, 09:51 PMHere you go.  I still haven't figured our how thr new photo upload works.

Just measured a spare I have.  OD is 14.6mm, ID 8.0mm and the o ring is 3.6mm thick.
Where did you order from? Looking online at suppliers is a nightmare to find stuff
Title: Re: Fuel regulator o ring size?
Post by: Eric GSX1400K3 on Sunday, 26 March 2023, 09:27 AM
Hi Banditowner1200, I ordered a whole new quantum efi pump a while ago. The original pump is now in the shed. The quantum kit comes with a new reg and two o rings. I may have measured the old o ring, will check.

They are a tight fit into the housing, a smear of rubber grease does the trick.

The link that DD sent through will also help you
Text only | Text with Images