Text only | Text with Images

GSX1400 Owners .org

Technically Speaking => General Technical discussion => Topic started by: ringfeder3 on Thursday, 01 September 2022, 01:02 PM

Title: Gauge 'buckets'
Post by: ringfeder3 on Thursday, 01 September 2022, 01:02 PM
I damaged the plastic chrome 'buckets' which contain the gauges on my 2007 gsx1400.

Is there a straight-forward technique to remove the whole assembly so they can be replaced?

Title: Re: Gauge 'buckets'
Post by: Hooli on Friday, 02 September 2022, 05:34 AM
Yes.
Title: Re: Gauge 'buckets'
Post by: Hooli on Friday, 02 September 2022, 05:35 AM
Two Allen bolts under the top yoke to take the lot off or two screws in the holes in the chrome case to just remove them from the clocks.
Title: Re: Gauge 'buckets'
Post by: Milts on Friday, 02 September 2022, 06:17 AM
@ringfeder3

Yes it's a straight forward job to replace the chrome housing as Hooli said, but they ain't cheap to buy!!

Shame you aren't in the UK as i have a spare, (not the chrome type these have a brushed alluminium finish.)
Just as well as these would be even dearer lol.
Text only | Text with Images