Hi everyone, I'm new to the forum. I have a K1 which I recently bought without proper gauges. I made the decision to buy chinese made CB1300 gauges due to difficulty finding used GSX gauges/price of OEM. I have everything wired and working except the speedo. Working from the wiring diagrams I have found, there are 2 wires coming from the speedo sensor on the gsx (a Pink/Black and an orange and red). When I wire either of these or both to the speedo wire on the gauges nothing seems to happen (needle remains at zero).
If anybody has any advice I'd appreciate it!
Thanks :)
Wiring pic: The red is actually orange and red. Excuse the shotty tape job; I will be soldering and heat shrinking once I have the speedo working
G'Day Alex and welcome to the nuthouse. I'm sure one of the fine gentlemen here will be able to assist you. :boogie2:
Please post some pics of your bike and especially the gauge set up :onya: :onya:
You need Thommohawk, I think you'd only find him on the FB groups these days though
By the way, is it really a K1? They were Japan only and limited to 120mph as far as I know. K2s were sold from Sept 2001 in the UK.
Quote from: GSXKING on Monday, 14 February 2022, 07:50 PM
G'Day Alex and welcome to the nuthouse. I'm sure one of the fine gentlemen here will be able to assist you. :boogie2:
Please post some pics of your bike and especially the gauge set up :onya: :onya:
Thanks for the welcome, have updated the post with photos.
Quote from: Hooli on Monday, 14 February 2022, 08:08 PM
By the way, is it really a K1? They were Japan only and limited to 120mph as far as I know. K2s were sold from Sept 2001 in the UK.
Must be a K2 then! Thanks I don't know a whole lot about model specifics.
Quote from: Hooli on Monday, 14 February 2022, 08:07 PM
You need Thommohawk, I think you'd only find him on the FB groups these days though
Thanks I'll post on the FB group too.
Hi Alex, welcome to the world of the GSX1400, hope you get the wiring sorted for the speedo.
(https://gsx1400owners.org/forum/gallery/0/1-290517235220.png)
Diagram courtesy of Thommohawk :onya:
https://gsx1400owners.org/forum/index.php?topic=4692.0