Can anybody tell me what size torque arm bolt (calliper end ) ? mines grotty as hell :)
I did mine the other day and Im sure its 14mm M10 but Ill double check in the AM
40mm long?
That's a guess from memory.
Quote from: Notty on Tuesday, 05 May 2020, 06:26 AM
Can anybody tell me what size torque arm bolt (calliper end ) ? mines grotty as hell :)
Photo please :facepalm:
I cant remember the size at the moment, but from memory it's M10x30mm, but please get it confirmed. Make sure you use a Nylock nut on it to ensure it doesn't come undone :onya:
Quote from: GSXKING on Tuesday, 05 May 2020, 05:57 PM
Quote from: Notty on Tuesday, 05 May 2020, 06:26 AM
Can anybody tell me what size torque arm bolt (calliper end ) ? mines grotty as hell :)
Photo please :facepalm:
@Notty , put the bolt in a little mesh bag , throw it in the dishwasher,it'll come up a treat a little polish afterwards, be good as new. :boogie2: :salute:
Looks fine to me?
Notty, ya don't buy a new car everytime it gets dirty, so just clean it & polish it. I've done those bolts before & they come up nice.
(https://gsx1400owners.org/forum/gallery/0/5-130619192437.jpeg)
Here they are fitted to the front caliper (mounting bolts) while I waited for the braided lines to arrive. All since completed a while ago.
(https://gsx1400owners.org/forum/gallery/0/5-130619195959.jpeg)
I change the crap bolts that Mr Suzuki fitted to stainless whenever I come across them. I only change the car when the ash tray is full :)
I'm biting my tongue :facepalm: :facepalm: :facepalm: :frustrated:
That'll be the crap bolts of the right metal getting replaced with more brittle stainless that'll fail quicker? :stir:
Quote from: Hooli on Friday, 08 May 2020, 03:09 AM
Looks fine to me?
Looks just like mine. Mail me yours I'll use it as a spare :stir: :stir: :stir: :stir:
Quote from: froudy on Tuesday, 05 May 2020, 06:05 PM
I cant remember the size at the moment, but from memory it's M10x30mm, but please get it confirmed. Make sure you use a Nylock nut on it to ensure it doesn't come undone :onya:
@Notty,
@froudy According to the parts microfiche, its M10x37
I wasn't far off with 40mm then.
I need to get out more!
Quote from: Hooli on Friday, 08 May 2020, 07:48 PM
That'll be the crap bolts of the right metal getting replaced with more brittle stainless that'll fail quicker? :stir:
Hear Hear :clapping: :clapping: :clapping:
Quote from: gsxbarmy on Wednesday, 13 May 2020, 01:59 AM
Quote from: froudy on Tuesday, 05 May 2020, 06:05 PM
I cant remember the size at the moment, but from memory it's M10x30mm, but please get it confirmed. Make sure you use a Nylock nut on it to ensure it doesn't come undone :onya:
@Notty, @froudy According to the parts microfiche, its M10x37
I was close then...What's 7mm between friends :rofl2: