Print Page - B-King - brake and clutch master cylinders.

Title: B-King - brake and clutch master cylinders.
Post by: KoZi on Thursday, 02 January 2020, 10:16 PM

Hi All in new year ;)!
Quick action - I want to do a little upgrade and put B-King brake and clutch master cylinder.
Know, that it will fit on the bar but do OEM staineles brake hose will be enough length and fit P&P to brake master cylider frm B-king ? On clutch hose i didn't see a lenght problem.

Thanks 4any comments :hat:

Title: Re: B-King - brake and clutch master cylinders.
Post by: seth on Friday, 03 January 2020, 05:10 AM

I've just sold this complete set up today as I couldn't get the clutch cut out switch to work .
Other than that they fitted no problem with hoses on standard bars .

Title: Re: B-King - brake and clutch master cylinders.
Post by: KoZi on Friday, 03 January 2020, 06:12 AM

Hmm what type off switch is in b-king clutch master cylinder ?
I thought that it is a normal on/off switch :jack:

Title: Re: B-King - brake and clutch master cylinders.
Post by: seth on Friday, 03 January 2020, 06:20 AM

It has 3 conectors so I'm thinking the bking has s 2 stage clutch isolation circuit I couldn't work it out so sold the lot and got a brembo brake master cylinder and will look for a clutch one that has the same kind of switch as the gsx once it's back on the road .

Title: Re: B-King - brake and clutch master cylinders.
Post by: Irish in Oz on Friday, 03 January 2020, 07:19 AM

The switch might be a type of proximity sensor so it requires a supply and sends a signal back hence the three wires. I don't know for sure as never seen the wiring diagram.

Title: Re: B-King - brake and clutch master cylinders.
Post by: seth on Saturday, 04 January 2020, 03:15 AM

Thats what i coildnt work out so all sold on now got a slight loss but gone . :doh:

GSX1400 Owners .org

Technically Speaking => Brakes => Topic started by: KoZi on Thursday, 02 January 2020, 10:16 PM