Print Page - Tubeless valve

Title: Tubeless valve
Post by: T 24 on Saturday, 07 September 2019, 10:10 PM

Does anybody know the type or diameter of the tubeless valve?
Or the diameter of the hole in wheel?
It's a bit difficult to take the tubeless valve away and then go and buy new one with that same bike.

Title: Re: Tubeless valve
Post by: Bob on Saturday, 07 September 2019, 11:47 PM

I think it's just bigger than 11mm, I have a bare wheel at work, if no one knows exact measurement I will get it for you Monday

Title: Re: Tubeless valve
Post by: T 24 on Sunday, 08 September 2019, 12:02 AM

Quote from: Bob on Saturday, 07 September 2019, 11:47 PM
I think it's just bigger than 11mm, I have a bare wheel at work, if no one knows exact measurement I will get it for you Monday

Thanks in advance.

Title: Re: Tubeless valve
Post by: Notty on Sunday, 08 September 2019, 02:33 AM

11.3mm
http://gsx1400owners.org/forum/index.php?topic=3105.msg42789#msg42789

Title: Re: Tubeless valve
Post by: T 24 on Sunday, 08 September 2019, 02:41 AM

Thanks.

Title: Re: Tubeless valve
Post by: T 24 on Tuesday, 10 September 2019, 03:43 AM

The correct tubeless valve type is TR 412. Also TR 413 can be used, it's only a bit longer.

Title: Re: Tubeless valve
Post by: KiwiCol on Tuesday, 10 September 2019, 03:49 AM

I prefer the right angle metal ones, soooooo much easier to check & adjust pressures. There's no way I'd replace the originals with a like version, just me though.

Good info (for those that use them) on the oem valve part number T24. :onya:

GSX1400 Owners .org

Technically Speaking => Wheels & Tyres => Topic started by: T 24 on Saturday, 07 September 2019, 10:10 PM