GSX1400 Owners .org
Technically Speaking => General Technical discussion => Topic started by: Clarence Bodikker on Sunday, 21 April 2019, 12:05 PM
My brake pedal does not activate the brake light. I can see that there is too much slack in the spring. Is there some trick to accessing the adjustment mechanism or do I have to dismantle half the bike to get at it?
I think you can take off the right hand foot rest completely and this will help you to get to the brake switch a bit better mate
If you are lucky or the threads or clean... You can turn the plastic adjuster nut behind the right hand side foot rest.
It's a fiddly job.
If you do remove the footrest hanger and the two springs come off it's a right b*tch to get them back on again. I cleaned and adjusted mine while the rear wheel and swingarm was out earlier in the week :onya:
Grip the spring with needle nose pliers and bend it a little to take up the slack :mwink:
Quote from: Blubber on Sunday, 21 April 2019, 09:41 PM
If you are lucky or the threads or clean... You can turn the plastic adjuster nut behind the right hand side foot rest.
That. It's adjustable to suit people moving the lever to suit themselves.