GSX1400 Owners .org
Technically Speaking => Exhausts => Topic started by: Clivey on Saturday, 09 March 2019, 03:20 AM
Hi, just taken collection of my 06, the main stand stopper appears to be fitted but is not stopping, is it the correct one? Any help or suggestions please?
Many thanks
Clivey
Another pic
Final one
I think you need some kind off rubber stopper fitted to the Crome bracket to stop that banging against the main stand
Ye i think your right
@Mrg i think there is suposed to be two brackets with a rubber on the end and it looks like yours have broke off .
That's it
It needs a couple of grommets from an electrical suppliers or a
3-5mm rubber tap washer glued onto the stopper.
:cheers:
If you can't get the original stopper then you could always try some thick rubber window (car or lorry ) door trim that has a open grove so you could fit this down the length of the Crome bracket see what you think mate
As others have said there should be a rubber stopper in that bracket.
Thank you for all your help guys 👍