Print Page - New member

Title: New member
Post by: T250 on Tuesday, 01 May 2018, 11:23 PM

Hi, just joined after taking ownership of a very sad and neglected K2 :cry2: total strip and start again job... :facepalm:

Title: Re: New member
Post by: Latty66 on Tuesday, 01 May 2018, 11:47 PM

Welcome aboard mate stick some pics up

Title: Re: New member
Post by: Andre on Wednesday, 02 May 2018, 12:03 AM

Welcome :hat:

Title: Re: New member
Post by: seth on Wednesday, 02 May 2018, 12:15 AM

:welcome1:
To all things 1402
There's loads of info and help so get stuck in and bring your bike back to good condition
Good luck :cheers:

Title: Re: New member
Post by: T 24 on Wednesday, 02 May 2018, 12:29 AM

Welcome T250!

Title: Re: New member
Post by: ARH on Wednesday, 02 May 2018, 01:56 AM

Welcome.. :cheers:

Title: Re: New member
Post by: Del on Wednesday, 02 May 2018, 03:28 AM

Hi Welcome to the forum T250 - plenty of knowledge on here to assist with rebuild mate

Del :onya:

Title: Re: New member
Post by: KiwiCol on Wednesday, 02 May 2018, 03:36 AM

Hi T250, welcome to the club.

Title: Re: New member
Post by: lil4399 on Wednesday, 02 May 2018, 04:13 AM

Bienvenue! :8:

By the way, my first bike was a Villiers 250T (close to T250)

Title: Re: New member
Post by: KiwiCol on Wednesday, 02 May 2018, 04:22 AM

Mine was a Hustler as first bike

Title: Re: New member
Post by: VladTepes on Wednesday, 02 May 2018, 09:30 AM

(https://gsx1400owners.org/forum/gallery/0/1-290517235220.png)

Total rebuild? Well there is PLENTY of good info here mate that'll be helpful to you, check out the "Downloads" section and the pinned posts in the relevant technical forums.

And of course, ask questions. You'd be amazed at the ~~rubbish~~ knowledge in some people's noggins around here !

Title: Re: New member
Post by: Kiwifruit on Wednesday, 02 May 2018, 11:15 AM

Hi T250. Good luck with the rebuild :cheers:

Title: Re: New member
Post by: Mick_J on Wednesday, 02 May 2018, 07:49 PM

Welcome to the forum T250, where are you?

Title: Re: New member
Post by: Blubber on Wednesday, 02 May 2018, 07:55 PM

welcome :salute:

good way to get to know your machine :onya:

Title: Re: New member
Post by: lloydjames on Thursday, 03 May 2018, 02:18 AM

Welcome :cheers:

Title: Re: New member
Post by: Notty on Thursday, 03 May 2018, 02:28 AM

Welcome - Croeso :smile2:

Title: Re: New member
Post by: Taniwha on Sunday, 06 May 2018, 04:56 PM

Gidday Cobber, you've come to the right place.

Title: Re: New member
Post by: Mrg on Monday, 07 May 2018, 05:32 AM

:welcome1 and 😊 enjoy

GSX1400 Owners .org

General => Introductions => Topic started by: T250 on Tuesday, 01 May 2018, 11:23 PM