Text only | Text with Images

GSX1400 Owners .org

General => Bike Chat => Topic started by: Teufel on Thursday, 11 January 2018, 03:08 PM

Title: Horsepower or Torque
Post by: Teufel on Thursday, 11 January 2018, 03:08 PM
A little bit off topic but
I just got my GSXR 1200 dynoed and it makes 210 hp.
Better still it makes 108 ft/lbs @ 8100.
It makes over 100 ft/lbs from 7000 to 11000 and it weighs 192 kgs fully fuelled.

I am a very happy man.
Just had to share.
Title: Re: Horsepower or Torque
Post by: KiwiCol on Thursday, 11 January 2018, 03:32 PM
Bloody awesome mate!  That's huge.
Title: Re: Horsepower or Torque
Post by: T 24 on Thursday, 11 January 2018, 04:42 PM
Is that dyno result from crank(calculated) or from rear wheel?
If it is from crank, it is very good, if it is from rear wheel, it is huge!
The difference in Suzuki is about 13%.
Title: Re: Horsepower or Torque
Post by: grog on Thursday, 11 January 2018, 07:14 PM
id be sharing also Teufel, unreal power no matter where its measured. im assuming rear wheel. job well done :clapping:
Title: Re: Horsepower or Torque
Post by: Teufel on Thursday, 11 January 2018, 07:35 PM
Thank you.
Yes, of course it's from the rear wheel.
Rule of thumb is minus 10%.
So + 11% would make it 233 at the crank.
I always wanted to make that point.
It sounds so awesome, but once again, I didn't want to sound wankie.
So I'll say it again
210hp @ 11500 at the rear wheel (= 233 at the crank) and 108 ft/lb also at the rear wheel @ 8150
Title: Re: Horsepower or Torque
Post by: Andre on Thursday, 11 January 2018, 07:49 PM
That's 146 Nm :onya:
Title: Re: Horsepower or Torque
Post by: T 24 on Thursday, 11 January 2018, 07:53 PM
Great! Only real hp is rear wheel hp!
That GSXR will fly!
Title: Re: Horsepower or Torque
Post by: VladTepes on Friday, 12 January 2018, 05:57 PM
(https://static.carthrottle.com/workspace/uploads/comments/61b2359d654fa37996dd94b991a8e65f.jpg)
Text only | Text with Images